Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Fort Lauderdale, FL
Window installation in Fort Lauderdale runs $650-$1,400 per opening for standard vinyl or aluminum replacement, with impact-rated products starting around $1,100 and climbing based on HVHZ certification level and marine-grade hardware requirements. Most Fort Lauderdale homes were built between the 1950s and 1970s with original jalousie or single-pane aluminum windows that fail current Broward County code and leak during summer thunderstorms. We measure every opening to the sixteenth, write the price on that same document, and install under the Haven Standard with a 365-Day Done Right Promise. Call (754) 254-8492 to schedule your free measured survey.
Why Fort Lauderdale Homes Are Different
Fort Lauderdale sits entirely inside Broward County’s High-Velocity Hurricane Zone, one of only two counties in Florida with this designation. Any permitted window or door replacement must carry a valid Miami-Dade NOA or Florida Product Approval explicitly rated for HVHZ, a stricter standard than Orlando, Tampa, or Naples faces. Inspectors check this approval at rough-in; crews from outside South Florida routinely arrive with standard Product Approval products and fail inspection outright.
The city’s 300-plus miles of inland canals push salt-laden air deep into neighborhoods like Coral Ridge, Lauderdale Manors, and Progresso Village, accelerating galvanic corrosion on aluminum frames and hardware even a mile from the beach. Original 1950s-1970s concrete block construction dominates these areas, with jalousie and louvered windows that are wholly non-compliant under current code. The Las Olas corridor and beachfront condo towers add crane logistics and HOA approval layers that inland ranch homes never see. Summer afternoon thunderstorms with wind-driven rain expose every weak seal and improper flashing detail, making post-storm leak callbacks a seasonal pattern for contractors who cut corners on anchoring.
Our Main Fort Lauderdale Services
Fort Lauderdale homeowners call us most often for full-frame replacement and HVHZ-rated impact protection. These three services have dedicated Fort Lauderdale pages with deeper product and pricing detail.
Window Replacement in Fort Lauderdale
We replace original jalousie, single-pane aluminum, and failed vinyl windows across Fort Lauderdale’s 1950s-1970s housing stock, from Coral Ridge ranch homes to Tarpon River duplexes. Every replacement starts with a measured survey you keep, and we specify products from our eight manufacturer lines by what your opening requires, not by what is in stock. Window Replacement in Fort Lauderdale covers full-frame vs. insert replacement, permit handling, and the HVHZ approval documentation we provide before ordering.
Impact Windows & Doors in Fort Lauderdale
HVHZ-rated impact windows and doors are mandatory for permitted replacement in Fort Lauderdale, not an upgrade. We specify PGT, CGI, CWS, and ES Windows products with current Miami-Dade NOAs, pull permits under Broward County’s enhanced inspection schedule, and document every anchor pattern and flashing detail with photos you receive. Impact Windows & Doors in Fort Lauderdale details our product tiers by price range and performance spec.
Sliding & Patio Doors in Fort Lauderdale
Multi-panel sliding systems in Fort Lauderdale face salt corrosion on tracks and rollers, plus HVHZ wind-load requirements that standard patio doors cannot meet. We install impact-rated sliding, folding, and multi-slide systems with marine-grade hardware, measured to your finished floor elevation for proper drainage across canal-side lots. Sliding & Patio Doors in Fort Lauderdale covers track replacement, wall-cut modifications, and HOA documentation for high-rise installations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Fort Lauderdale
Window installation in Fort Lauderdale means navigating two conditions that do not coexist elsewhere in Florida: HVHZ code compliance for every permitted opening, and chronic salt-air corrosion from the canal grid that attacks frames and hardware year-round. Most of our Fort Lauderdale work replaces original jalousie, louvered, or single-pane aluminum windows in 1950s-1970s concrete block homes, where the rough opening has settled, the original flashing has failed, and the existing frame shows galvanic corrosion at the sill. We install windows by measuring first, writing the price on that same document, and delivering a photo record of every anchor, shim, and seal when the job closes.
Single & Double Hung Windows
Signs you need it
Your sashes no longer stay open without a prop, the balance system is visible or broken, or you feel air movement at the meeting rail during a summer thunderstorm.
What it costs in Fort Lauderdale
Standard vinyl single or double hung installation in Fort Lauderdale typically runs $650-$980 per opening; impact-rated HVHZ units with marine-grade hardware range $1,100-$1,650.
How we do it
We remove the sash and frame to the rough opening, inspect the sill pan and header for corrosion or rot, install the new unit with Tapcon anchors into the concrete block, foam-seal the perimeter, and flash with self-adhered membrane before the Broward County inspection.
Horizontal Roller Windows
Signs you need it
The sash rolls unevenly or jumps the track, the lock no longer engages the keeper, or you see daylight at the sill meeting point when the sash is closed.
What it costs in Fort Lauderdale
Horizontal roller installation in Fort Lauderdale ranges $720-$1,050 for standard vinyl; impact-rated HVHZ units with stainless steel rollers and hardware run $1,200-$1,780.
How we do it
We verify the rough opening is square to within one-eighth inch, set the frame on a bed of sealant, anchor through the jambs into the block, adjust the stainless steel roller carriage for level travel, and test the lock engagement under load before sealing.
What Window Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Standard vinyl single/double hung | $650-$980 |
| Standard vinyl horizontal roller | $720-$1,050 |
| Impact-rated HVHZ single/double hung | $1,100-$1,650 |
| Impact-rated HVHZ horizontal roller | $1,200-$1,780 |
Do you pull permits for window installation in Fort Lauderdale?
Yes. Broward County requires a building permit for every window replacement in the HVHZ, and we pull permits on every job. The permit application includes the Miami-Dade NOA or Florida Product Approval number for each product, and the inspector verifies HVHZ eligibility at rough-in and final. Call (754) 254-8492 and we will check permit status on your property before scheduling the survey.
How long does window installation take in Fort Lauderdale?
Most residential window installations complete in one to three days, depending on opening count and whether we encounter corroded sill pans or block damage during removal. Condos on Las Olas or the beachfront may add HOA scheduling and crane days. We give you a written timeline with the price, not after.
Door Installation in Fort Lauderdale
Door installation in Fort Lauderdale must satisfy the same HVHZ mandate as windows: every exterior door replacement in a permitted project requires a product with Miami-Dade NOA or Florida Product Approval rated for High-Velocity Hurricane Zone wind loads. Original entry doors in 1950s-1970s Fort Lauderdale homes are often hollow-core or uninsulated metal slabs with corroded frames, failed weatherstripping, and single-point locking that does not meet current burglary resistance or wind-borne debris standards. We install doors by measuring the rough opening, specifying the product by performance tier and price range, and documenting every shim, anchor, and seal with photos.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your entry door flexes under hand pressure, the frame shows corrosion at the threshold, or the deadbolt no longer seats flush in the strike plate.
What it costs in Fort Lauderdale
HVHZ-rated fiberglass or steel entry door systems in Fort Lauderdale typically run $1,800-$3,200 installed, including marine-grade hardware and multi-point locking; high-end decorative impact systems with sidelites range $3,500-$5,800.
How we do it
We remove the door and frame to the rough opening, inspect the concrete block for spalling or moisture intrusion, install the pre-hung unit with Tapcon anchors at 12-inch centers, shim plumb and square, apply self-adhered flashing tape at the sill and jambs, and adjust the multi-point lock for smooth engagement.
French & Double Doors
Signs you need it
The inactive leaf no longer seals against the astragal, you see light between the doors when both are closed, or the sill threshold has corroded through to the subfloor.
What it costs in Fort Lauderdale
French and double door installation in Fort Lauderdale ranges $2,400-$4,100 for standard vinyl or fiberglass; impact-rated HVHZ systems with integrated multi-point hardware and marine-grade thresholds run $3,800-$6,500.
How we do it
We verify the rough opening width is within one-quarter inch of specification, set the frame on a bed of sealant, anchor both jambs and the mull post independently, adjust the active leaf for consistent compression against the weatherstrip, and test the multi-point lock sequence before final seal.
What Door Installation Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| HVHZ-rated fiberglass/steel entry door | $1,800-$3,200 |
| Decorative impact entry with sidelites | $3,500-$5,800 |
| Standard French/double doors | $2,400-$4,100 |
| Impact-rated HVHZ French/double doors | $3,800-$6,500 |
Do I need a permit to replace my front door in Fort Lauderdale?
Yes. Broward County requires a building permit for any exterior door replacement in the HVHZ, and the inspector will verify the product’s HVHZ eligibility at final. We pull the permit, schedule inspections, and provide the documentation for your records. Call (754) 254-8492 to confirm your product selection meets code before ordering.
Can you match my existing door style with HVHZ-rated products?
Yes. Therma-Tru and other manufacturer lines offer decorative glass, panel profiles, and finish options that replicate traditional styles while carrying current Miami-Dade NOAs. We bring sample swatches and glass options to the measured survey so you see the product before we write the price.
Energy-Efficient Windows in Fort Lauderdale
Energy-efficient window installation in Fort Lauderdale addresses a climate reality that generic efficiency ratings ignore: summer cooling loads driven by solar heat gain through east- and west-facing glass, combined with year-round humidity that makes single-pane condensation a mold risk on canal-side properties. Original aluminum single-pane windows in neighborhoods like Lauderdale Manors and Progresso Village transmit heat at rates that modern Low-E coatings and argon gas fills reduce by 40 to 60 percent. We specify energy-efficient windows by U-factor and SHGC values matched to your orientation and shading conditions, not by a one-size-fits-all label.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms exceed 78 degrees by mid-afternoon despite air conditioning, or you wipe condensation from the interior glass on humid mornings.
What it costs in Fort Lauderdale
Low-E with argon gas fill in Fort Lauderdale typically adds $80-$140 per opening to standard vinyl replacement; in impact-rated HVHZ units, the upgrade runs $120-$220 per opening.
How we do it
We specify the Low-E coating type by orientation, soft-coat for south and west elevations, hard-coat where salt-air exposure demands durability, fill the insulated glass unit with argon to 90 percent concentration, and verify the spacer is warm-edge stainless to prevent seal failure in tropical humidity.
UV-Blocking & Fade Protection
Signs you need it
Hardwood floors, artwork, or upholstered furniture near south-facing windows shows fading or discoloration within two to three years of installation.
What it costs in Fort Lauderdale
UV-blocking laminated or tinted options in Fort Lauderdale add $150-$280 per opening to standard replacement; in impact-rated units with integrated UV interlayer, the range is $220-$380.
How we do it
We measure the visible light transmission and UV rejection percentage from the manufacturer’s spec sheet, specify the interlayer thickness for your fade-risk items, and document the performance values on the written quote so you have the numbers if your HOA questions the tint level.
What Energy-Efficient Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Low-E/argon upgrade, standard vinyl | +$80-$140 per opening |
| Low-E/argon upgrade, impact-rated HVHZ | +$120-$220 per opening |
| UV-blocking/tinted, standard vinyl | +$150-$280 per opening |
| UV-blocking, impact-rated with interlayer | +$220-$380 per opening |
Will energy-efficient windows lower my FPL bill in Fort Lauderdale?
Most Fort Lauderdale homeowners see cooling-season reductions of 12 to 25 percent after replacing single-pane aluminum with Low-E, argon-filled units, depending on home orientation and existing insulation. East-west exposure and large glass area yield the fastest payback. Call (754) 254-8492 for a measured survey that calculates your specific heat-gain reduction.
Do energy-efficient windows qualify for rebates in Fort Lauderdale?
Florida Power & Light periodically offers window rebates for ENERGY STAR certified products; we track current programs and include rebate paperwork with your documentation package. The product must be ENERGY STAR labeled and installed by a licensed contractor to qualify.
Impact Garage Doors in Fort Lauderdale
Impact garage door installation in Fort Lauderdale is governed by a code detail many homeowners miss: the garage door is the largest opening in most homes, and HVHZ wind-load requirements apply to this surface with the same force as windows and entry doors. Original garage doors in 1950s-1970s Fort Lauderdale homes are typically uninsulated, non-impact-rated, and mounted to wood jambs that have rotted at the sill from splash-back during summer thunderstorms. We install impact garage doors with wind-load ratings matched to your exposure category, documented with a photo record of every track anchor and jamb connection.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door flexes visibly in afternoon thunderstorms, the track brackets are fastened to wood that crumbles under screwdriver pressure, or your permit application for window replacement triggered a garage door inspection requirement.
What it costs in Fort Lauderdale
Hurricane-rated steel or aluminum garage doors in Fort Lauderdale typically run $2,200-$4,500 for a two-car opening, including wind-load-rated tracks, heavy-duty hardware, and automatic opener reconnection; insulated impact systems with windows range $3,800-$6,200.
How we do it
We measure the opening for square and plumb, specify the door by design pressure rating for your exposure, install steel jambs anchored to the concrete block with wedge anchors, attach the wind-load track with through-bolts, and test the auto-reverse and emergency release before final inspection.
Wind-Load Code Compliance
Signs you need it
Your garage door lacks a visible wind-load sticker, the building department flagged the garage opening during a window or roof permit inspection, or you are selling and the buyer’s inspection noted non-compliant garage door hardware.
What it costs in Fort Lauderdale
Wind-load retrofit of an existing garage door in Fort Lauderdale, including track replacement, heavy-duty hardware, and jamb reinforcement, typically runs $1,400-$2,800; full replacement with a new HVHZ-rated door and opener starts at $2,200.
How we do it
We verify the existing door’s design pressure rating from the manufacturer’s label or documentation, calculate the required rating for your structure’s exposure category and mean roof height, and either retrofit with rated hardware or specify a new door with the Miami-Dade NOA number recorded on your permit.
What Impact Garage Doors Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Hurricane-rated two-car garage door | $2,200-$4,500 |
| Insulated impact door with windows | $3,800-$6,200 |
| Wind-load retrofit, existing door | $1,400-$2,800 |
| Full replacement with opener | $2,200-$4,800 |
Does my garage door need to be impact-rated in Fort Lauderdale?
Yes, if you are pulling a permit for any exterior work that triggers a garage opening inspection, or if your home is in an exposure category requiring wind-load protection on all openings. Broward County enforces this more strictly than non-HVHZ counties. Call (754) 254-8492 and we will check your exposure category and permit history before quoting.
Can you reuse my garage door opener with a new impact door?
Most standard openers can be reconnected to a new impact-rated door if the horsepower and rail length match the new door’s weight and height; we test the auto-reverse force and safety eye alignment to current standards. Older chain-drive units may need replacement to handle the heavier wind-load construction.
Custom & Geometric Windows in Fort Lauderdale
Custom and geometric window installation in Fort Lauderdale solves a problem specific to the city’s architectural mix: mid-century modern homes in Coral Ridge and the Tarpon River area were built with clerestory, arched, and shaped openings that standard rectangular replacements cannot fill, while new construction and renovations demand oversized glass walls that exceed stock unit dimensions. Every custom unit in the HVHZ must carry a Miami-Dade NOA or Florida Product Approval rated for the specific geometry, and approvals for non-rectangular shapes are limited to verified manufacturer lines. We install custom and geometric windows by surveying the opening with digital templates, submitting the drawing for engineering approval, and building the written price from that documented specification.
Geometric & Shaped Windows
Signs you need it
Your existing shaped window has cracked glass and no manufacturer label, or you are renovating and the architect specified a trapezoid, octagon, or circular opening that stock catalogs do not list.
What it costs in Fort Lauderdale
Geometric and shaped windows in Fort Lauderdale typically start at $1,400-$2,600 for standard vinyl; impact-rated HVHZ custom shapes with engineered reinforcement run $2,800-$5,500 depending on complexity and glass area.
How we do it
We template the opening with a digital measuring system accurate to one-sixteenth inch, submit the drawing to the manufacturer for HVHZ engineering review, receive a job-specific NOA or approval letter, and fabricate the unit to that exact template with no field cutting permitted.
Oversized Openings
Signs you need it
Your renovation plan calls for a window or glass wall exceeding 60 square feet, or your existing oversized unit has seal failure visible as fog between panes and the manufacturer is no longer in business.
What it costs in Fort Lauderdale
Oversized window installations in Fort Lauderdale range $4,500-$8,500 for standard construction; impact-rated HVHZ oversized units with laminated glass and reinforced frames run $7,200-$14,000, with crane or swing-stage access adding $800-$2,500 for high-rise or inaccessible locations.
How we do it
We engineer the header and sill support for the increased dead load, specify the glass thickness and lamination pattern for wind load and deflection limits, coordinate crane or swing-stage logistics with Broward County traffic control if required, and install with a crew of four to six for units exceeding 200 pounds.
What Custom & Geometric Windows Costs in Fort Lauderdale
| Item | Typical range in Fort Lauderdale |
|---|---|
| Geometric/shaped, standard vinyl | $1,400-$2,600 |
| Geometric/shaped, impact-rated HVHZ | $2,800-$5,500 |
| Oversized opening, standard construction | $4,500-$8,500 |
| Oversized opening, impact-rated HVHZ | $7,200-$14,000 |
How long does custom window fabrication take in Fort Lauderdale?
Custom and geometric windows typically require eight to fourteen weeks from template approval to delivery, depending on the manufacturer’s current backlog and whether HVHZ engineering review is required. We do not write the final price until the template is approved and the lead time is confirmed, so your quote reflects real delivery dates. Call (754) 254-8492 to start the template process.
Can you match a custom shape that is no longer manufactured?
Yes. We template the existing opening, reverse-engineer the geometry, and submit to manufacturers with custom capability in our verified lines. The new unit will carry a current Miami-Dade NOA or Florida Product Approval; we do not replicate non-compliant originals even when requested.
Brands We Service in Fort Lauderdale
We specify from eight verified manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Parts for ES Windows, ECO Window Systems, and Therma-Tru are stocked locally through our Miami-area logistics, reducing lead times for service calls and warranty work. See our brands for performance tiers and price ranges by product category.
Pricing for Windows & Doors in Fort Lauderdale, FL
| Service | Typical range in Fort Lauderdale |
|---|---|
| Standard vinyl single/double hung window | $650-$980 |
| Standard vinyl horizontal roller window | $720-$1,050 |
| Impact-rated HVHZ single/double hung | $1,100-$1,650 |
| Impact-rated HVHZ horizontal roller | $1,200-$1,780 |
| HVHZ-rated fiberglass/steel entry door | $1,800-$3,200 |
| Decorative impact entry with sidelites | $3,500-$5,800 |
| Standard French/double doors | $2,400-$4,100 |
| Impact-rated HVHZ French/double doors | $3,800-$6,500 |
| Low-E/argon upgrade, standard vinyl | +$80-$140 per opening |
| Low-E/argon upgrade, impact-rated HVHZ | +$120-$220 per opening |
| Hurricane-rated two-car garage door | $2,200-$4,500 |
| Geometric/shaped, impact-rated HVHZ | $2,800-$5,500 |
Prices in Fort Lauderdale push toward the higher end when we encounter corroded sill pans, spalled concrete block, or HOA-mandated product lines that require special ordering. The written quote you receive at the measured survey is the final invoice; Haven Clause 1 means no change orders, no surprises, no additional charges after work begins.
Neighborhoods We Serve in Fort Lauderdale
We install and replace windows and doors across Fort Lauderdale’s full residential range, from 1950s concrete block ranches to high-rise condos with crane logistics. Crews dispatch from our Miami-area office and typically schedule Fort Lauderdale appointments within one to three business days of the initial call.
- Coral Ridge
- Lauderdale Manors
- Progresso Village
- Tarpon River
- Las Olas corridor
Service Area - Cities Near Fort Lauderdale
Our crews serve the full Broward County HVHZ corridor and adjacent communities. We regularly schedule measured surveys in Plantation, FL, Hollywood, FL, Margate, FL, and Coral Springs, FL, all of which share Fort Lauderdale’s High-Velocity Hurricane Zone requirements and salt-air exposure conditions. The same Haven Standard, product lines, and written-price protocol apply in every city we serve.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Fort Lauderdale
We answer calls live 24/7 and typically schedule Fort Lauderdale appointments within one to three business days. Emergency board-up for storm damage is same-day; planned installations and replacements are scheduled by availability and permit status. Crews dispatch from our Miami-area office with route optimization for Broward County.
Condos and homes in deed-restricted communities, especially along Las Olas and the beachfront, require HOA architectural committee approval before permit application. We provide product cut sheets, Miami-Dade NOA documentation, and finish samples for your HOA packet, and we do not order material until written approval is received.
Broward County requires a building permit for every exterior window and door replacement in the HVHZ, with inspections at rough-in and final. The permit application must list each product’s Miami-Dade NOA or Florida Product Approval number, and the inspector will verify HVHZ eligibility explicitly. We pull permits, schedule inspections, and provide the approved documentation for your records as part of every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Lauderdale Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.