Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTrusted Window Replacement for Davie Homeowners
Window replacement in Davie typically runs $650-$2,400 per opening depending on frame type, glazing specification, and whether the job requires full-frame removal or insert replacement. Most Davie homes built between 1985 and 2010 carry original aluminum single-pane windows that fail the current Florida Building Code for wind-borne debris, and replacing them with impact-rated or energy-efficient units usually takes one to three days per project once materials arrive. At Sightline Windows & Doors Davie, we’ve measured, priced, and installed more than 18,000 openings since 2012 under the Haven Standard, and every job starts with a written quote that matches the final invoice - no change orders, no surprises.
Davie’s location at the edge of the Everglades drainage basin creates specific stress on window systems: summer humidity stays above 75 percent from May through October, afternoon thunderstorms drive horizontal rain against west-facing elevations, and the soil’s high organic content causes subtle foundation settlement that shifts frame squareness over time. We’ve replaced windows in Shenandoah, Ivanhoe, and every Davie neighborhood in between, and we also handle Window Replacement in Margate - we know which wall sections tend to show water intrusion first. Call (754) 254-8492 to schedule your free measured survey. The document we leave with you becomes your written quote - Haven Clause 1, Have it in writing.
What Our Window Replacement Service Includes
Full Frame Replacement
Full frame replacement removes the entire existing window unit - sash, frame, jamb, and exterior trim - down to the rough opening. You need this when the existing frame is rotted, out of square beyond shimming tolerance, or when you’re upgrading from a non-impact to an impact-rated assembly that requires deeper jamb depth and structural fastening into the king stud. In Davie, we perform full frame replacement most often on homes built before 1992 with original aluminum windows, where the frame itself has become the thermal bridge and the fin seal has degraded. Our crew documents the rough opening dimensions, sheathing condition, and sill pan slope with dated photographs before any material leaves the truck - Haven Clause 4, Evidence on every job.
Insert Window Replacement
Insert replacement, sometimes called pocket replacement, leaves the existing frame in place and installs a new window unit inside the old jamb. This works when the frame is structurally sound, square within 1/8 inch across the diagonal, and free of rot or termite damage. Insert replacement costs less and disturbs less interior and exterior trim, but it reduces the glass area slightly and cannot upgrade a non-impact frame to impact rating. We recommend insert replacement in Davie’s 1995-2005 construction tracts where vinyl windows were originally installed and the frames remain stable but the glazing seals have failed. Our measured survey includes a frame-squareness reading and a moisture meter check of the sill - if either fails, we flag it in writing before you commit to the insert path.
Vinyl Replacement Windows
Vinyl replacement windows use PVC extrusion for the frame and sash, with internal air chambers for thermal insulation and welded corners for water tightness. They’re the most common specification we install in Davie for homeowners prioritizing cost efficiency and low maintenance, particularly on east-facing elevations where salt corrosion from Atlantic breezes degrades aluminum over time. We specify vinyl units from ECO Window Systems and ViewLux with multi-chamber frame designs and warm-edge spacers; the U-factor on a standard double-pane vinyl replacement in Davie’s climate zone typically runs 0.30-0.32, with SHGC around 0.25 when low-E coating is applied to surface #2. Every vinyl replacement we quote includes the full frame or insert method, the specific glazing package, and the installation detail - all in the same document you keep.
Energy-Efficient Upgrade
An energy-efficient upgrade replaces existing windows with assemblies that meet or exceed ENERGY STAR criteria for South Florida - U-factor at or below 0.32, SHGC at or below 0.25, and air leakage below 0.3 cfm per square foot. Davie homeowners see the clearest return on this investment in homes with west-facing glass areas greater than 60 square feet, where afternoon solar gain drives cooling load through August and September. We calculate the projected energy improvement using your current window count, orientation, and FPL billing history if you provide it, then specify the appropriate glazing package from our ES Windows or ECO Window Systems lines. The upgrade path may include triple-track low-E, argon fill, or laminated impact glass depending on whether your priority is thermal performance, hurricane protection, or both.
Window Maintenance & Care
Window maintenance and care extends service life and identifies replacement candidates before they become emergency failures. We offer this as a standalone service for Davie homeowners who want documented condition assessment of every opening - frame, hardware, seal, and glazing - with a written report and photograph record. Maintenance visits include track cleaning and lubrication, weep hole clearing, weatherstrip inspection, and operability testing; if we find a unit that needs replacement, we note the rough opening size and condition so you have the information for a future quote. This service is particularly useful in Davie’s Shenandoah and Long Lake Ranches areas, where custom homes from the 1990s carry mixed window vintages and homeowners want to phase replacement over multiple years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Window Replacement
We install and replace windows across eight verified manufacturer lines, specified by what the opening requires rather than what sits in a warehouse. Our ES Windows line serves Davie homeowners who need impact-rated vinyl or aluminum systems with Miami-Dade NOA certification and documented cycle testing to TAS 201, 202, and 203 - we’ve installed hundreds of ES units in Davie and Cooper City since 2015, and we maintain direct distributor access for warranty support and custom sizing. For energy-efficient vinyl replacement with multi-point locking and fusion-welded frames, we specify ECO Window Systems, a Florida-manufactured line we know down to the extrusion die numbers; their 3000 series carries a U-factor of 0.30 with optional triple-pane upgrade for north Davie homes where winter heat loss matters more than summer gain.
Therma-Tru entry systems and Mr-Glass impact-resistant laminated products round out our specification set for Davie openings that need door-window integration or custom glazing packages. We’ve replaced Mr-Glass assemblies in Davie equestrian properties where large fixed glass areas require hurricane protection without the visual grid of shutters, and we’ve integrated Therma-Tru sidelites with matching window systems in our Window Replacement in Plantation and Weston for consistent sightlines across the elevation. Whether your home carries PGT, CGI, CWS, ViewLux, or any other make, we can source replacement units, verify rough opening compatibility, and install to manufacturer specification with the full Haven Standard documentation.
Before
AfterSigns You Need Window Replacement Right Now
- Visible moisture between glass panes indicates seal failure in an insulated glass unit. The inert gas has escaped, the desiccant is saturated, and the thermal performance has dropped to roughly that of a single pane. In Davie’s humidity, this condition accelerates - we’ve measured interior surface condensation on failed IGUs at outdoor temperatures as low as 68 degrees when relative humidity climbs above 80 percent.
- Frame rot or soft spots in the sill means water has found a path past the exterior seal and is degrading the substrate. On wood-frame windows common in Davie’s 1970s-1980s construction, this progresses from cosmetic to structural quickly; on vinyl frames, it suggests improper flashing at installation that may have damaged the rough opening behind.
- Difficulty operating sashes or hardware failure creates a life-safety issue, not merely an annoyance. Windows that won’t open block egress during fire; windows that won’t close or lock compromise security and hurricane protection. We see this most often in Davie homes with original aluminum single-hung units where the balance spring has corroded or the sash track has deformed from thermal cycling.
- Drafts or temperature stratification near the glass signals either seal degradation, frame leakage, or inadequate original specification for the climate. Hold a lit candle near the sash perimeter on a breezy day - flame deflection indicates air infiltration that your HVAC system is working to overcome. In Davie, where cooling dominates nine months of the year, this shows up on utility bills before it shows up in comfort complaints.
- Storm damage or impact cracking requires immediate assessment even if the glass remains in place. A cracked impact-rated lite may still resist wind pressure, but its structural integrity is compromised and the next storm cycle could cause catastrophic failure. After Hurricane Irma in 2017, we documented dozens of Davie windows with hairline cracks that homeowners had dismissed; three had progressed to full panel blowout by the following season.
Our Window Replacement Process - Step by Step
- 1
Measured survey and written quote. We arrive at your Davie home with a laser measure, moisture meter, and level, and we record every rough opening dimension, frame condition note, and sightline obstruction. You receive a copy of this survey before we leave; the written quote derived from it cannot differ - Haven Clause 1. The quote specifies frame type, glazing package, manufacturer line, installation method, and total project price with no provisional allowances.
- 2
Material order and permit application. Once you approve the quote, we order custom-manufactured units to the surveyed dimensions and submit permit application to the Town of Davie Building Division. Davie requires permit and inspection for all window replacements that alter the opening size or change the structural fastening; we pull the permit as part of our scope and schedule inspections around your availability. You receive the permit number and inspection schedule in writing.
- 3
Pre-installation site preparation. Our crew arrives on the scheduled date - Haven Clause 2, Arrive on schedule - with background-checked, uniformed technicians identified by license number before they enter your home. We lay protective sheeting, establish a material staging area, and photograph the existing condition of walls, flooring, and landscaping adjacent to each opening. This documentation protects both parties and establishes the baseline for our photo record.
- 4
Removal, installation, and weatherproofing. We remove the existing unit, inspect and repair the rough opening as needed, install the replacement with manufacturer-specified fasteners and sealants, and apply flashing tape and sill pan to Davie’s wind-borne debris requirements. Every joint is checked for square, every fastener torqued to spec, and every seal verified with a water test before trim replacement begins. The crew lead signs off on a checklist that travels with the job file.
- 5
Final inspection, documentation, and warranty activation. We schedule the Town of Davie inspector for code compliance verification, then deliver your final photo record showing before, during, and after conditions of every opening. The 365-Day Done Right Promise activates automatically - Haven Clause 5, No surprises - and we register your manufacturer warranty with the serial numbers of installed units. Your final invoice matches the written quote to the dollar.
How Much Does Window Replacement Cost in Davie?
A typical insert vinyl replacement window in Davie runs $650-$1,100 per opening, while full-frame replacement with impact-rated aluminum or vinyl generally falls between $1,200 and $2,400 depending on size, glazing specification, and exterior trim repair requirements. See our Window Replacement cost guide for detailed pricing breakdowns. Custom geometric shapes, fixed picture windows over 60 inches, and integrated door-window assemblies push toward the upper end of that range or beyond. These figures reflect Davie’s current material and labor market as of 2024; we update our pricing quarterly against distributor quotes and permit fee schedules.
| Window Type | Installation Method | Typical Range per Opening |
|---|---|---|
| Vinyl double-hung, standard size | Insert replacement | $650-$950 |
| Vinyl double-hung, standard size | Full frame replacement | $1,100-$1,600 |
| Impact-rated aluminum or vinyl | Full frame replacement | $1,400-$2,200 |
| Large fixed picture window (60″+) | Full frame replacement | $1,800-$2,800 |
| Custom geometric or architectural shape | Full frame replacement | $2,000-$3,500+ |
Several factors move a project within or above these ranges. Rough opening repair from prior water damage adds $150-$400 per opening. Exterior stucco or siding repair to match existing texture runs $300-$800 per wall section. Interior trim replacement with painted pine or pre-finished composite adds $75-$200 per opening. We itemize every one of these potentials in your written quote - nothing is held back as a “typical extra” discovered mid-project.
To avoid overpaying, we recommend obtaining a second opinion on any written estimate. Bring us a competitor’s quote and we will review the specification, manufacturer line, and installation detail at no charge - our Free Second Opinion service. We’ve found that Davie homeowners who compare two written quotes catch specification gaps (single-pane labeled as “energy-efficient,” non-impact sold as “hurricane-ready”) that would cost thousands to correct later. Our quote includes the measured survey, permit and inspection fees, installation labor, manufacturer warranty registration, and the 365-Day Done Right Promise - all in the same document.
Window Replacement Near Davie - Our Service Area
We replace windows across Davie and the surrounding municipalities, with typical drive times of 10-25 minutes to Window Replacement in Cooper City, Window Replacement in Plantation, Pembroke Pines, Sunrise, Lauderhill, Weston, Miramar, Lauderdale Lakes, Hollywood, Tamarac, and Miami Gardens. Davie homeowners in neighborhoods like Ivanhoe, Shenandoah, Long Lake Ranches, and Forest Ridge represent our core service territory, and we’ve developed specific familiarity with the window vintages and failure patterns in each subdivision. Response to initial calls is immediate - live person, 24/7 - and we schedule measured surveys within one to three business days depending on your availability and current project load.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Window Replacement in Davie
Window replacement is the removal of an existing window assembly and installation of a new unit, either as an insert within the existing frame or as a full-frame replacement down to the rough opening. At Sightline Windows & Doors Davie, we begin every replacement with a measured survey that documents rough opening dimensions, frame condition, and sightline requirements; you keep this document, and it becomes the basis for your written quote. Call (754) 254-8492 to schedule your free measured survey.
A typical single-opening replacement takes 2-4 hours; a whole-home project of 10-15 openings usually completes in one to three days depending on frame type, exterior finish repair, and weather. Davie’s afternoon thunderstorm pattern from May through October can delay exterior work for safety reasons; we build this contingency into our schedule commitments rather than promising unrealistic single-day turnarounds. Call (754) 254-8492 for a timeline specific to your project scope.
Window replacement in Davie ranges from $650 per opening for standard vinyl insert replacement to $2,400 or more for full-frame impact-rated units with custom sizing. The specific price depends on frame material, glazing specification, installation method, and any rough opening or trim repair required. We provide exact written quotes after measured survey - never estimates that change later - and we offer free second opinions on any competitor’s written quote. Call (754) 254-8492 for your exact price.
Yes, we install and replace Therma-Tru entry systems and integrated sidelite assemblies, and we coordinate window specification to match sightlines and performance characteristics across the elevation. We’ve completed Therma-Tru integrations in Davie, Window Replacement - Fort Lauderdale, and Weston where the entry door and adjacent windows needed consistent frame depth and glazing package. Call (754) 254-8492 to discuss your specific Therma-Tru configuration.
We answer calls live 24 hours a day and can deploy a crew for board-up and temporary weatherproofing within hours of a storm impact or break-in, but permanent replacement requires custom manufacturing lead time that cannot be bypassed. For true emergencies - post-storm structural compromise, security breach - we secure the opening and schedule replacement on the earliest available production slot. Call (754) 254-8492 for immediate response; the temporary protection is documented with photographs and included in your project file.
Every window replacement we complete carries the 365-Day Done Right Promise written into the Haven Standard - if any aspect of the installation fails to perform as specified, we correct it at no charge within one year. Manufacturer warranties on the window units themselves run 10 years to lifetime depending on the product line and are registered in your name at completion. The warranty documentation, like the photo record and final invoice, travels with your project file and is available on request. Call (754) 254-8492 with specific warranty questions.
Clear furniture and wall decorations from the work zone on both sides of each opening, remove window treatments and hardware, and ensure our crew has driveway access for material staging and tool setup. We handle protective sheeting, dust containment, and debris removal; you don’t need to vacate the home during work. We’ll notify you of any specific preparation needs - exterior plant protection, alarm system coordination - when we confirm your installation date. Call (754) 254-8492 to schedule and receive your preparation checklist.
Schedule Your Window Replacement Service in Davie Today
Call (754) 254-8492 to schedule your free measured survey. A live person will answer, day or night, and we’ll book a time that works for your schedule. You’ll receive a written quote before any work starts, a documented photo record when the job finishes, and the 365-Day Done Right Promise on every opening - Haven Standard, every time, since 2012.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Davie since 2012.