Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Coral Springs, FL
Window installation in Coral Springs typically runs $650-$1,400 per opening for standard vinyl or aluminum replacement, with impact-rated products starting around $1,100 and climbing based on glazing spec and opening size. Most Coral Springs homes were built between the late 1960s and late 1980s with original single-pane aluminum windows that are now 40-55 years old, so nearly every job we measure involves full-frame removal, masonry refinishing, and Florida Product Approval compliance for Broward County’s High-Velocity Hurricane Zone. We coordinate scheduling from our Miami office and dispatch crews to Coral Springs daily; call (754) 254-8492 to schedule your free measured survey, or read more about our process.
Why Coral Springs Homes Are Different
Coral Ridge Properties master-planned this city almost entirely between the late 1960s and late 1980s, which means block after block of concrete block stucco homes now carries original single-pane aluminum windows that have reached end of life simultaneously. In neighborhoods like Ramblewood, Wyndham Lakes, and Eagle Trace, we regularly measure openings where the frame oxidation from salt-laden Atlantic air pushed inland has corroded the weep channels, and the afternoon UV exposure on west-facing elevations has baked weatherstripping to crumbles.
The current Florida property insurance crisis adds pressure Broward homeowners cannot ignore. Carriers are canceling or non-renewing policies on homes without Florida Product Approval impact windows, so a replacement job in Coral Springs is almost always both an aging-stock overhaul and an insurance-compliance project. That dual requirement changes every specification: the window must pass wind-borne debris testing and lower the home’s risk profile enough to satisfy underwriters.
Many 1970s-era enclosed Florida rooms and screen enclosures were originally glazed with jalousie or louvered windows, which carry no hurricane rating whatsoever. When a homeowner applies for a Coral Springs Building Division permit to replace them, the inspection often triggers a full opening-compliance review that adds scope and cost the owner had not budgeted.
Our Main Coral Springs Services
Most Coral Springs homeowners who call us start with one of these three projects:
Window Replacement in Coral Springs
We remove the original single-hung or horizontal sliding aluminum frames common to 1970s and 1980s Coral Springs construction, measure the rough opening to the sixteenth, and specify replacement windows with Florida Product Approval numbers that satisfy both the building inspector and the insurance underwriter. The measured survey becomes your written quote under Haven Clause 1. Window Replacement in Coral Springs covers full-frame and insert options by opening type.
Impact Windows & Doors in Coral Springs
Every product we specify for Coral Springs carries Florida Product Approval or Miami-Dade Notice of Acceptance, because Broward County sits in the High-Velocity Hurricane Zone. We match the design pressure rating to your specific exposure, whether you back up to the Heron Bay golf course or face open fetch toward the Atlantic. Impact Windows & Doors in Coral Springs details the glazing options and hardware upgrades.
Sliding & Patio Doors in Coral Springs
The original sliding glass doors in Coral Springs homes of this era often run 6 or 8 feet on a single track with corroded rollers and no interlock strength. We replace them with multi-point lock systems and impact-rated laminated glass that meets the same Florida Product Approval standard as your windows. Sliding & Patio Doors in Coral Springs covers pocket, stacker, and standard configurations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Coral Springs
Window installation in Coral Springs means working with 40-55-year-old masonry openings that were never designed for modern impact-rated frames. The original single-pane aluminum windows in Ramblewood, Wyndham Lakes, and Eagle Trace were set in stucco returns with minimal flashing, so removal almost always exposes block damage, corroded fasteners, or missing sill pan flashing that must be corrected before the new window goes in. We start every job with a measured survey you keep, and the written quote cannot differ from that document - Haven Clause 1. Window Installation covers our full process nationwide.
Single & Double Hung Windows
Signs you need it
The top sash drops on its own, the balance shoes are broken or missing, or you feel Atlantic-driven humidity between the single pane and any aftermarket storm panel you have added.
What it costs in Coral Springs
Standard vinyl single-hung installation runs $650-$950 per opening; impact-rated single or double hung with laminated glass and reinforced frames runs $1,100-$1,600.
How we do it
We remove the old frame and any corrored fasteners, repair the block return and apply new sill pan flashing, then set the new window plumb and square before foaming, sealing, and documenting the installation with photos you receive.
Horizontal Roller Windows
Signs you need it
The sash jumps the track, the rollers have flattened to squares, or the single pane transmits so much heat that west-facing rooms in Coral Springs peak above 85 degrees by 4 PM even with the AC running.
What it costs in Coral Springs
Standard horizontal roller installation runs $700-$1,000 per opening; impact-rated versions with stainless steel rollers and laminated glass run $1,200-$1,700.
How we do it
We cut the stucco return to expose the nailing fin, verify the rough opening is square within one-eighth inch, set the frame on a bed of sealant, shim at the manufacturer’s specified points, and secure with corrosion-resistant fasteners before finishing the waterproofing layer.
What Window Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Standard vinyl single-hung window | $650 - $950 |
| Impact-rated single/double hung window | $1,100 - $1,600 |
| Impact-rated horizontal roller window | $1,200 - $1,700 |
Do you repair old aluminum windows, or only replace?
We do not repair original single-pane aluminum windows in Coral Springs because no repair restores the Florida Product Approval or the thermal performance that insurance underwriters and the building code now require; we measure for full replacement and give you the written price before any work starts. Call (754) 254-8492 for your free measured survey.
Will my stucco need repair after you remove the old window?
On 40-55-year-old Coral Springs homes, stucco damage at the return is common and we include block refinishing and matching stucco patch in our scope when the measured survey shows it is needed, with the cost named in the written quote, not added later. Call (754) 254-8492 to schedule your survey.
Door Installation in Coral Springs
Door installation in Coral Springs faces the same dual pressure as windows: the original 1970s and 1980s entry doors are hollow-core or thin-gauge steel with no impact rating, and insurance carriers are demanding Florida Product Approval on all exterior openings. We measure the jamb depth, note the hinge and strike locations on the document you keep, and specify Therma-Tru or PGT entry systems with the DP rating and hardware schedule that satisfies both the Coral Springs Building Division and your underwriter. Door Installation covers our national scope.
Entry Doors
Signs you need it
The door slab is delaminating, the jamb is soft at the threshold from years of humid air infiltration, or the deadbolt no longer seats flush because the frame has settled in the CBS wall.
What it costs in Coral Springs
Standard fiberglass entry door with basic sidelite runs $1,800-$2,800 installed; impact-rated fiberglass or steel entry system with laminated glass and multi-point lock runs $3,200-$5,500.
How we do it
We remove the old unit including the frame and threshold, repair any block damage at the rough opening, set the new pre-hung door on a bed of sealant with shims at hinge locations, verify plumb and swing clearance, then install the multi-point hardware and document with photos.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurance carrier has listed non-impact entry doors as a reason for non-renewal, or the Coral Springs Building Division has flagged your existing door during a permit review for another project.
What it costs in Coral Springs
Impact-rated entry door systems with Miami-Dade NOA and high-design-pressure ratings run $3,500-$6,000 depending on sidelite configuration and hardware grade.
How we do it
We verify the NOA matches your exposure category, remove the old door and any corroded fasteners, install new corrosion-resistant anchors into the CBS wall, set the frame with continuous sealant behind the nailing fin, and test the multi-point lock before the inspector arrives.
What Door Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Standard fiberglass entry door with sidelite | $1,800 - $2,800 |
| Impact-rated entry door system | $3,200 - $5,500 |
| High-DP impact entry with sidelite | $3,500 - $6,000 |
Do I need a permit to replace my front door in Coral Springs?
Yes, the Coral Springs Building Division requires a permit for any exterior door replacement because the inspection verifies Florida Product Approval and proper flashing integration with the CBS wall; we pull the permit and schedule the inspection as part of our scope. Call (754) 254-8492 to schedule your free measured survey.
Can you match my existing stucco after door removal?
We include stucco repair and color-matched patch in our written quote when the measured survey shows damage at the return, and we document the before condition with photos so there is no dispute about what existed. Call (754) 254-8492 for your survey.
Energy-Efficient Windows in Coral Springs
Energy-efficient windows in Coral Springs address a specific climate burden: the combination of intense year-round UV, salt-laden humid air pushed inland from the Atlantic, and thermal gain on west- and south-facing exposures drives cooling loads far above what the original 1970s single-pane aluminum windows were designed to handle. We specify Low-E coatings, argon gas fill, and insulated laminated glass with U-factors and SHGC values that meet or exceed ENERGY STAR criteria for South Florida, and we name the performance numbers on the written quote before any work starts. Energy-Efficient Windows details our national program.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms in Coral Springs peak above 82 degrees by late afternoon even with blinds closed, or your energy bill spikes June through September despite the AC running continuously.
What it costs in Coral Springs
Low-E coated dual-pane with argon gas fill in a standard vinyl frame runs $750-$1,100 per opening; upgrading to Low-E with argon in an impact-rated laminated configuration runs $1,250-$1,800.
How we do it
We measure each opening’s solar orientation, specify the appropriate Low-E coating for east-west or north-south exposure, verify the argon fill at the factory, and confirm the U-factor and SHGC on the NFRC label before installation.
Insulated Laminated Glass
Signs you need it
You need both the thermal performance for your Coral Springs energy bills and the impact rating for your insurance renewal, but you do not want to stack separate storm panels over energy-efficient windows.
What it costs in Coral Springs
Insulated laminated impact glass with Low-E and argon in a reinforced frame runs $1,400-$2,000 per opening, combining hurricane compliance and thermal performance in a single specification.
How we do it
We specify the interlayer thickness and air space to the manufacturer, verify the Florida Product Approval number covers the exact insulated laminated configuration, and install with the same flashing and sealing protocol we use on all impact-rated openings.
What Energy-Efficient Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Low-E/argon dual-pane, standard frame | $750 - $1,100 |
| Low-E/argon impact-rated laminated | $1,250 - $1,800 |
| Insulated laminated impact with Low-E | $1,400 - $2,000 |
Will energy-efficient windows lower my electric bill in Coral Springs?
Yes, replacing single-pane aluminum with Low-E/argon dual-pane or insulated laminated impact windows typically reduces cooling load 15-25% in Coral Springs homes, with the greatest savings on west and south exposures where UV gain is highest. Call (754) 254-8492 to schedule your free measured survey and see the projected U-factor for your openings.
Do energy-efficient windows still qualify for insurance discounts?
Only if they also carry Florida Product Approval for impact resistance; we specify products from PGT, CGI, and ECO Window Systems that meet both the thermal and hurricane criteria, and we list the approval numbers on your written quote. Call (754) 254-8492 to review the options.
Impact Garage Doors in Coral Springs
Impact garage doors in Coral Springs are increasingly required as insurance carriers tighten renewal criteria for homes with attached garages, where a failed door becomes a pressurization point that can lift the roof structure in a hurricane. The original thin-gauge, non-reinforced doors in 1970s and 1980s Coral Springs homes carry no wind-load rating, and many have corroded tracks from years of humid Atlantic air. We measure the opening, note the headroom and side-room clearances on the document you keep, and specify wind-load-rated doors with the Miami-Dade NOA or Florida Product Approval that satisfies your underwriter. Impact Garage Doors covers our full product range.
Hurricane-Rated Garage Doors
Signs you need it
Your insurance renewal notice specifically lists the garage door as non-compliant, or the existing door is thin-gauge steel with no wind-load sticker and no reinforcement struts.
What it costs in Coral Springs
Hurricane-rated garage door with reinforced tracks and heavy-duty hardware runs $2,200-$3,800 for a standard two-car opening; high-wind models with impact-rated glazing panels run $3,500-$5,500.
How we do it
We verify the wind-speed rating for your Coral Springs exposure category, remove the old door and track, install reinforced vertical and horizontal tracks with proper anchorage into the CBS header, hang the new wind-load-rated door, and balance the spring tension before the inspection.
Wind-Load Code Compliance
Signs you need it
The Coral Springs Building Division has flagged your garage door during a permit review for window or door replacement elsewhere on the home, or you are selling and the buyer’s inspector noted the lack of a wind-load rating.
What it costs in Coral Springs
Full wind-load upgrade including door, track, hardware, and permit inspection runs $2,800-$4,500 for a two-car opening, depending on the design pressure required for your specific location.
How we do it
We pull the permit, specify the exact design pressure from the Florida Building Code table for Broward County, install the labeled door and track system, and meet the inspector on site with the NOA documentation and our photo record.
What Impact Garage Doors Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Hurricane-rated garage door, standard 2-car | $2,200 - $3,800 |
| High-wind door with impact glazing panels | $3,500 - $5,500 |
| Full wind-load upgrade with permit | $2,800 - $4,500 |
Can I keep my existing garage door opener with a new impact door?
Sometimes, but only if the opener’s horsepower and rail system are rated for the heavier wind-load door; we test the existing opener during our measured survey and note on the written quote whether it must be upgraded or can remain. Call (754) 254-8492 to schedule your survey.
Does the garage door need its own permit in Coral Springs?
Yes, the Coral Springs Building Division requires a separate permit for garage door replacement because the inspection verifies the wind-load rating and proper track anchorage into the CBS structure; we pull the permit and coordinate the inspection as part of our scope. Call (754) 254-8492 for your free measured survey.
Custom & Geometric Windows in Coral Springs
Custom and geometric windows in Coral Springs solve a problem created by the 1970s and 1980s master-plan: builders used raked walls, clerestory bands, and octagonal or arched accent windows as architectural signatures, but glazed them with single-pane annealed glass that now leaks, cracks, or carries no hurricane rating. In neighborhoods like Eagle Trace, we regularly measure trapezoid and octagonal openings where the original glass has no Florida Product Approval and the frame has corroded to the point of structural compromise. We template each opening on site, specify the custom shape from ViewLux or PGT with the exact impact rating and performance numbers, and the measured drawing becomes part of the written quote you keep. Custom & Geometric Windows covers our national capabilities.
Geometric & Shaped Windows
Signs you need it
The original octagonal, trapezoid, or triangular accent window in your Coral Springs home has cracked glass, corroded frame, or no Florida Product Approval number that your insurance underwriter will accept.
What it costs in Coral Springs
Custom geometric impact-rated windows templated to your existing opening run $1,500-$2,800 depending on complexity, with multi-sided or compound curves at the higher end of the range.
How we do it
We build a full-scale template on site, verify the rough opening is still square and plumb after 40-plus years of settlement, send the template to the manufacturer with the exact DP rating required, and install with custom flashings that match the irregular geometry.
Arched & Curved Windows
Signs you need it
The arched top sash over your front door or the curved eyebrow window in your Coral Springs living room has separated from the frame, or the original single-pane glass sweats with every afternoon thunderstorm.
What it costs in Coral Springs
Custom arched or curved-top impact-rated windows with true radius or segment heads run $2,000-$3,500 installed, with pricing driven by the radius precision and whether the frame must be segmented or can be extruded in one piece.
How we do it
We measure the rise and chord of the arch to the sixteenth, specify the frame construction method, verify the Florida Product Approval covers the custom radius, and install with pre-formed arch flashings that integrate with the stucco return.
What Custom & Geometric Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Geometric impact window (octagon, trapezoid) | $1,500 - $2,800 |
| Arched or curved-top impact window | $2,000 - $3,500 |
| Custom shape with complex compound curve | $2,500 - $4,000 |
How long does a custom window take to manufacture?
Custom geometric and arched windows from ViewLux or PGT typically require 6-10 weeks from template approval in Coral Springs, and we build that lead time into your written quote with scheduled installation dates that do not change. Call (754) 254-8492 to start the templating process.
Can you match my custom window to the rest of my standard windows?
Yes, we specify the same frame color, hardware finish, and glazing tint across standard and custom openings so the sightline reads consistently from the curb, and we document the match on the written quote with manufacturer color codes. Call (754) 254-8492 to schedule your measured survey.
Brands We Service in Coral Springs
We stock parts and maintain direct specification relationships with PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, with Therma-Tru entry systems and PGT impact lines moving fastest through our Coral Springs jobs. Most non-stock orders arrive within 5-7 business days, and custom geometric shapes from ViewLux ship on the manufacturer’s published schedule. See our brands for full performance tiers and warranty terms.
Pricing for Windows & Doors in Coral Springs, FL
| Service | Typical range in Coral Springs |
|---|---|
| Standard vinyl single-hung window | $650 - $950 |
| Impact-rated single/double hung window | $1,100 - $1,600 |
| Impact-rated horizontal roller window | $1,200 - $1,700 |
| Low-E/argon dual-pane, standard frame | $750 - $1,100 |
| Insulated laminated impact with Low-E | $1,400 - $2,000 |
| Standard fiberglass entry door with sidelite | $1,800 - $2,800 |
| Impact-rated entry door system | $3,200 - $5,500 |
| Hurricane-rated garage door, 2-car | $2,200 - $3,800 |
| Full garage wind-load upgrade with permit | $2,800 - $4,500 |
| Geometric impact window (custom shape) | $1,500 - $2,800 |
| Arched or curved-top impact window | $2,000 - $3,500 |
Prices in Coral Springs push toward the higher end when we encounter corroded fasteners requiring block repair, stucco damage at the return, or the full opening-compliance review that the Building Division triggers on jalousie replacements. The price we write is the price you pay - Haven Clause 1 means the measured survey and the final invoice are the same document.
Neighborhoods We Serve in Coral Springs
We measure and install across Coral Springs daily, with crews dispatched from our Miami office to reach Ramblewood, Wyndham Lakes, Eagle Trace, and the surrounding master-planned sections. Most measured surveys are scheduled within 48 hours of your call, and installation dates are set at the time of quote acceptance.
- Ramblewood
- Wyndham Lakes
- Eagle Trace
- Heron Bay
- The Isles
Service Area - Cities Near Coral Springs
Our crews work throughout Broward and southern Palm Beach counties, with regular routes to Margate, FL, Plantation, FL, Fort Lauderdale, FL, and Pembroke Pines, FL. Scheduling and dispatch are coordinated from our Miami office, and we carry the same Haven Standard, written pricing, and documented photo record to every job in the service area.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Coral Springs
We typically schedule measured surveys within 48 hours of your call, with installation dates set at quote acceptance and no callback windows or voicemail queues - a live person answers our phones 24/7 at (754) 254-8492.
Many Coral Springs master-planned communities, including several sections of Ramblewood and Wyndham Lakes, require architectural review before exterior changes; we provide the product data sheets, Florida Product Approval numbers, and color samples you need for your HOA packet, and we do not start work until you have written approval.
We pull all required permits from the Coral Springs Building Division for window, door, and garage door replacement, schedule the inspections, and meet the inspector on site; the permit cost is included in your written quote, not added as a surprise line item.
Call (754) 254-8492 to schedule your free measured survey. Every job leaves a documented photo record, carries our 365-Day Done Right Promise under the Haven Standard, and starts with a written price that cannot change.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coral Springs Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.