Patio Door Installation Cost - Free Measure, Exact Written Quote

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Patio Door Installation Cost in Davie?

Patio door installation in Davie, FL typically runs between $1,200 and $4,800 per opening, depending on door type, impact rating, frame material, and the condition of the existing rough opening. Most Davie homeowners replacing a standard sliding glass door with an impact-rated unit land somewhere between $1,800 and $3,200, including labor. That range shifts upward when you’re adding a French door configuration, going custom-width, or working with a masonry opening that needs modification.

Patio Door Installation Cost Breakdown (2026)

The numbers below reflect what Sightline sees in the Davie market on real jobs – not national averages pulled from a database. Door prices vary by manufacturer line, glass package, and whether the opening is wood-framed or CBS (concrete block) construction. Labor is quoted separately and held to the same written document as the product cost, so nothing moves between quote and invoice.

A few things drive those ranges in Davie specifically. First, Broward County’s wind-load requirements mean that an impact-rated glazing package isn’t optional for most permitted installations – it’s the baseline. Second, a large share of Davie’s housing stock from the 1970s and 1980s uses CBS construction with block surrounds, which adds time to the installation when the rough opening needs to be reconfigured. Third, the sun exposure on west- and south-facing sliders in Davie is severe; homeowners frequently upgrade to low-E glass with a lower solar heat gain coefficient (SHGC), which adds $150 to $400 to the glass package but reduces cooling load measurably. We document every one of these conditions during the measured survey, and the written price you receive reflects exactly what your opening requires – not a national average.

What Affects Patio Door Installation Pricing in Davie

Six factors account for nearly every price difference we see on patio door jobs in Davie. Understanding them before you get quotes will help you compare contractor estimates on equal terms.

• Impact rating and glazing specification. Davie falls within Broward County’s High-Velocity Hurricane Zone (HVHZ). Any permitted patio door replacement must meet HVHZ glazing requirements – which means impact-rated glass or an approved film/shutter combination. Impact-rated units from manufacturers like PGT, CGI, and ECO Window Systems cost more upfront but satisfy the code requirement and often eliminate the need for separate storm panels. Non-impact doors can still be installed but require a code-compliant secondary protection system, which typically erases any savings.
• Door width and panel count. A 6-foot two-panel slider is priced differently from an 8-foot three-panel slider. Each additional panel means more glass, more frame, and more labor. In Davie neighborhoods like Imagination Farms and Rolling Hills Estates, we regularly see homeowners expanding older 6-foot openings to 8 or 10 feet to connect indoor living space to screened lanais – that width increase can add $800 to $1,800 to the total job.
• Frame material. Vinyl frames from lines like ES Windows and ECO Window Systems generally cost less than aluminum frames from PGT or CGI. Aluminum performs better over time in Davie’s salt-adjacent humidity and holds tighter tolerances on wider spans. The price difference between a vinyl and aluminum frame on a comparable impact door runs roughly $300 to $700 per opening.
• Existing opening condition. If the rough opening is square, level, and the correct width, installation is straightforward. If the block surround has moisture intrusion – which we see in older Davie homes near the Everglades edge, particularly in the 33314 and 33325 zip codes – the substrate needs repair before any frame goes in. Masonry opening modifications or frame rebuilds add $400 to $1,200 to the job and must be documented in the written scope before work starts.
• Glass package upgrades. Low-E coatings, argon fill, and laminated interlayer options all affect the final price. In Davie, where west-facing openings can see sustained afternoon sun well into October, specifying a low-SHGC glass package makes a practical difference on utility bills. The upgrade typically runs $150 to $400 over a standard impact glass package.
• Permit and inspection fees. The Town of Davie requires a permit for patio door replacements when the work involves structural modification or a change in the opening size. Broward County permitting fees for this scope typically run $75 to $250. Sightline pulls and manages the permit on your behalf – the fee is itemized on the written estimate, not added after the fact. Skipping the permit to save $150 creates a title issue when you sell and can void manufacturer warranties; we don’t offer that as an option.

Before

After

Impact Doors and Davie’s Wind Code: What You’re Actually Paying For

Davie sits inside Broward County’s HVHZ designation, which means the Florida Building Code applies its strictest glazing standards to every permitted opening in the town. An impact-rated patio door isn’t a luxury upgrade here – it’s the minimum code-compliant solution for a permitted replacement.

The way impact glazing works: a polyvinyl butyral (PVB) or SGP interlayer is bonded between two glass lites. When the glass breaks under wind-borne debris impact, the interlayer holds the fragments together and maintains the pressure barrier. That’s what the Miami-Dade Notice of Acceptance (NOA) and the Florida Product Approval number on the door certify. Every impact product Sightline installs carries that documentation, and a copy goes into the photo record we leave with you.

For Patio Door Installation in Davie, this means the product and labor cost you see in the table above already accounts for the impact-rated glazing package. If a competing quote looks significantly lower, the first question to ask is whether it includes an HVHZ-approved impact product or assumes a film/shutter workaround.

The other thing worth knowing: many Davie homeowners find that installing impact-rated patio doors qualifies them for a homeowner’s insurance premium discount. The discount varies by insurer and policy structure, but we’ve seen clients in Davie recover $200 to $600 annually after the upgrade. That’s worth a conversation with your insurance agent before you finalize the product spec.

How to Save on Patio Door Installation in Davie

Saving money on this project doesn’t require compromising on the door quality or the installation. It requires making informed decisions earlier in the process.

• Get the measured survey before you shop. Sightline’s measured survey – the document you keep – tells you the exact rough opening dimensions, the frame condition, and whether any substrate work is needed. Going into a product conversation with those numbers means you can compare quotes on identical scopes, not on different assumptions about what the job involves.
• Don’t over-specify on width if you don’t need it. An 8-foot opening is a meaningful upgrade over 6 feet, but if your patio is 10 feet wide, a 10-foot slider may not return proportional value. The measured survey helps you make that call with actual numbers, not guesswork.
• Match the glass package to the orientation. A north-facing slider in Davie doesn’t need the same low-SHGC glass spec as a south-facing one. Specifying a lower-performance glass package on a shaded or north-facing opening saves $150 to $300 without any practical trade-off.
• Bundle with other openings when the crew is already on-site. Labor is partially fixed per visit – mobilization, setup, and permit management cost about the same whether you’re doing one door or two. If you have a secondary patio opening or an adjacent window that needs work, doing them together almost always lowers the per-unit labor cost.
• Use the Free Second Opinion. Bring any written competitor estimate to Sightline and we’ll review it at no charge. We check the product specification, the glazing standard, and whether the scope accounts for the permit. That review has saved Davie homeowners real money when a low-priced quote turned out to be missing the impact requirement or the permit line item.
• Ask about energy rebates. Florida Power & Light (FPL) has offered rebates on qualifying energy-efficient window and door upgrades in past program years. Eligibility depends on U-factor and SHGC specifications. When we write your product spec, we note whether it qualifies – you take that documentation to FPL directly.

For an exact written number on your opening, call (754) 254-8492. A live person answers – not a callback queue. The measured survey is free, and the price it produces is the price on the invoice.

Patio Door Types: Which One Fits Your Davie Home?

The cost differences in the table above correspond to real functional differences between door configurations. Here’s how to think about each type for a Davie home specifically.

Sliding Glass Doors

The most common patio door in Davie, particularly in homes built between 1975 and 2000. A two-panel slider with one fixed and one operable panel is the workhorse configuration. PGT’s WinGuard line and CGI’s Sentinel series are the two impact-rated aluminum slider lines Sightline installs most frequently in Davie – both carry HVHZ approval and perform consistently in the humidity and salt-air conditions that affect hardware longevity here. Vinyl sliders from ES Windows and ECO Window Systems cost less and still meet the code requirement; they’re a reasonable choice on north-facing or interior-courtyard openings where aluminum’s thermal performance advantage matters less.

French Doors

French door pairs – two hinged panels that swing in or out – are more common in Davie homes built after 2005, particularly in planned communities like Imagination Farms and Harmony at Davie. They cost more than sliding configurations of the same width primarily because the hinged hardware is more complex and the impact-rated glazing in a swinging door requires a different structural approach than a slider. Therma-Tru and CWS both produce impact-rated French door units that perform well in Davie’s climate; Therma-Tru’s fiberglass construction resists the humidity-driven expansion that affects wood-core doors in South Florida.

Multi-Panel and Pocket Systems

Three- and four-panel sliding systems, or pocket systems that fold into the wall, are the highest-cost configuration. They’re specified less frequently in standard Davie residential stock but are increasingly common in renovations where homeowners are removing a full wall section to open the living area to a covered lanai. These projects almost always involve structural work alongside the door installation, and the permit scope is broader. The $3,800 to $6,800 range in the table assumes the structural work is handled separately – if it’s bundled, the total rises.

What the Installation Process Looks Like

Understanding the sequence helps you evaluate any installer’s process – and catch the ones that skip steps.

1. Measured survey. A Sightline technician measures the rough opening, checks the frame condition, photographs the existing installation, and documents the sightline clearances. You receive a copy of this document. It becomes the written price.
2. Written quote. The quote matches the measured survey. No separate document, no “we’ll figure it out when we get there.” Haven Clause 1 – have it in writing – means the measured survey and the invoice are the same document. The permit fee is line-itemed here.
3. Product order. Sightline orders from one of eight manufacturer lines – PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, or ViewLux – based on what the opening requires. Lead times vary by manufacturer and configuration; a standard in-stock PGT or CGI slider typically runs 3 to 6 weeks in the current South Florida market.
4. Permit pull. Sightline manages the Broward County or Town of Davie permit process. The permit number goes on file before the crew arrives to install.
5. Installation. Background-checked, uniformed technicians – identified by license number before arrival per Haven Clause 3 (Verified Crews) – remove the existing door, prepare the opening, set and anchor the new frame, apply the required flashing and sealant, and test the operation. The job site is left clean.
6. Photo record. Every visit produces a documented photo record: before, during, and after. You receive this as standard evidence of the completed work – not as an upsell.
7. Inspection. The Town of Davie or Broward County inspector closes out the permit. This step is non-negotiable on any structural or code-required work.
8. 365-Day Done Right Promise. If anything isn’t right within 365 days of installation, Sightline makes it right. This is written into the Haven Standard on every job, not offered as a courtesy.

Davie-Specific Conditions That Affect Patio Door Pricing

Davie isn’t the same market as Weston or Cooper City, even though they’re adjacent. A few local conditions genuinely affect what you’ll pay and what product you should specify.

The western sections of Davie – particularly the 33330 and 33331 zip codes, which border the Everglades Agricultural Area – see higher humidity and occasional soil movement from organic substrate compaction. Homes in these areas sometimes show frame racking that isn’t visible until a measured survey reveals the rough opening is out of square. A level door installed in an uneven opening will rack over time; documenting and correcting the opening before installation is the right call, even if it adds labor cost.

Davie’s equestrian district and older agricultural-residential areas include homes with non-standard opening widths that were custom-built during original construction. Standard stock widths from most manufacturers are 6 feet and 8 feet. A 7-foot or 9-foot opening requires a custom-width order, which adds 3 to 5 weeks to lead time and $400 to $900 to product cost. We see this most often in homes on multi-acre lots in the University Drive corridor.

The town’s code enforcement is active. Unpermitted patio door work in Davie creates real problems at resale – Broward County title searches increasingly flag unpermitted work as a condition on disclosure, and several Davie homeowners have had to pull retroactive permits (at higher cost) when selling. Sightline permits every job that requires one. It’s not an option we give customers to decline.

How Sightline Handles Pricing in Davie

Since 2012, across more than 18,000 windows and doors installed, the operating principle has been consistent: the measured survey and the invoice are the same document. The technician who measures your opening writes the price, and that price doesn’t change unless the scope changes – and if the scope changes, you see it in writing before any additional work proceeds.

That approach is formalized in the H.A.V.E.N. Standard. Haven Clause 1 (Have it in writing) means no verbal estimates, no “we’ll add it to the invoice.” Haven Clause 3 (Verified Crews) means the person installing your door is background-checked, uniformed, and on record by license number. Haven Clause 4 (Evidence on every job) means the photo record is yours, not ours.

Sonia Raman leads the Sightline operation in Davie and has been the person accountable for that standard since the beginning. If a job under the Haven Standard isn’t done right, the 365-Day Done Right Promise is the mechanism – not a customer service conversation, not a goodwill gesture. It’s written on the job document.

For homeowners who want to understand how this pricing compares to other services, visiting our home page gives a clear overview of every service category and the same pricing transparency applied across the board.

FAQs – Patio Door Installation Cost in Davie

How much does patio door installation cost in Davie, FL in 2026?

Most Davie homeowners pay between $1,800 and $3,200 for a standard impact-rated sliding glass door, fully installed and permitted. French door configurations run $2,600 to $4,400. Multi-panel or pocket systems start around $3,800. The final number depends on door width, frame material, glass package, and the condition of the existing opening. Call (754) 254-8492 for a written number specific to your opening – the measured survey is free.

Do I need a permit to replace a patio door in Davie?

Yes, in most cases. The Town of Davie requires a permit when a patio door replacement involves a change to the opening size, structural framing, or when the work is in a location governed by Broward County’s HVHZ requirements. Permit fees typically run $75 to $250 and are itemized on your written estimate. Sightline manages the permit process – you don’t have to navigate that separately. Skipping a required permit creates a title disclosure issue at resale and can void the manufacturer warranty.

Is it cheaper to repair or replace a patio door in Davie?

Repair is cheaper when the problem is isolated – a worn roller, a bent track, a failed lock mechanism. Roller and track repairs run $150 to $350. But if the frame has moisture intrusion, the glazing has failed (fogging between panes), or the door no longer meets current HVHZ impact requirements, replacement is the better financial decision. An impact-rated door that satisfies the current code also qualifies for insurance premium discounts that a repaired non-impact door does not. If you’re unsure, the measured survey will document exactly what condition the frame and glazing are in. Call (754) 254-8492 and we’ll give you an honest read.

How long does patio door installation take in Davie?

The physical installation of a standard two-panel sliding glass door takes 4 to 8 hours for one opening. French door configurations or openings that need masonry modification take 6 to 12 hours. Lead time from order to installation is the longer variable: standard in-stock configurations from PGT or CGI currently run 3 to 6 weeks in the South Florida market; custom widths add 3 to 5 weeks. The permit process runs in parallel and doesn’t usually extend the timeline if it’s filed promptly.

Can I use a non-impact patio door in Davie to save money?

You can install a non-impact door on a permitted job, but the building code then requires a code-compliant secondary protection system – typically accordion shutters or panel shutters – that must be rated for the HVHZ wind load. Shutter systems for a single patio opening run $600 to $1,400 installed. When you add that cost to a non-impact door, the total frequently exceeds the cost of an impact-rated door. Additionally, non-impact configurations may not qualify for the same insurance discounts. We run this comparison in writing on every job where a customer asks about it, so you can make the decision with the actual numbers in front of you.

Written by Sonia Raman, Owner at Sightline Windows & Doors Davie, serving Davie, FL since 2012.

Pricing reflects the Davie market as of 2026. Sightline Windows & Doors Davie offers free estimates – call (754) 254-8492.