Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Davie, FL
Window installation in Davie typically runs $650-$1,400 per opening for standard vinyl or aluminum units, and $1,800-$3,200 for impact-rated replacements, with most ranch-home retrofits needing 12-18 openings to complete the envelope. We measure every opening with a laser sightline tool, produce a written quote you keep, and install under the Haven Standard that has governed our work since 2012. Call (754) 254-8492 to schedule your free measured survey.
Our crews serve Davie from the brand’s South Florida scheduling office, carrying Miami-Dade NOA-certified products for every opening we touch. Whether you’re replacing original 1970s aluminum casements on a Stirling Road ranch or upgrading an 8-foot slider to paddock access, the measurement and the quote are the same document.
Why Davie Homes Are Different
Davie’s identity as Broward County’s horse country means its housing stock is dominated by 1970s-1980s single-story ranch homes on large equestrian lots, the majority of which still carry original non-impact aluminum windows and oversized sliding glass doors that predate modern code. Because Davie sits within Broward County’s High-Velocity Hurricane Zone (HVHZ)-alongside Miami-Dade, the strictest wind-load jurisdiction in the US-every window and door replacement must carry a Miami-Dade Notice of Acceptance (NOA), making this older ranch-home retrofit market exceptionally large, technically demanding, and permit-intensive compared to counties just north of the county line.
The town’s equestrian-zoned streets off Stirling Road and Griffin Road frequently feature 8-foot or wider aluminum sliding glass doors designed to access rear paddocks. These non-standard oversized openings require specially engineered HVHZ-rated impact sliding doors that most manufacturers don’t stock off the shelf, routinely adding weeks to lead time and significant custom labor cost compared to a standard Broward suburb job. Salt-air intrusion combined with extreme UV, even 10-12 miles inland, accelerates frame oxidation and glazing seal failure on the area’s aging aluminum units.
Our Main Davie Services
Most Davie homeowners who call us start with one of two needs: replacing original windows that no longer seal against heat or storms, or upgrading doors to code-compliant impact ratings. Here is what each service involves locally.
Window Replacement in Davie
We replace original jalousie and single-pane aluminum casement windows on Davie ranches with HVHZ-rated vinyl or aluminum impact units, pulling permits through Broward County and scheduling inspections to match the town’s equestrian-property access requirements. Every measured survey documents frame squareness, wall thickness, and existing sill condition because 1970s CBS ranch construction varies batch to batch. Window Replacement in Davie
Impact Windows & Doors in Davie
Full-envelope impact upgrades on Davie homes require Miami-Dade NOA products for every opening, including garage doors and patio sliders, with pressure ratings matched to the home’s specific wind-zone exposure. We specify PGT, CGI, or CWS lines by performance tier and price range, not by margin, and the written scope lists every NOA number before work starts. Impact Windows & Doors in Davie
Sliding & Patio Doors in Davie
Oversized sliding glass doors on equestrian properties demand custom-ordered HVHZ-rated impact rollers with reinforced tracks and multi-point locking; standard 6-foot stock units rarely fit the 8-foot-plus openings common off Griffin Road. Lead times run longer than standard, and the measured survey includes track depth, header load, and threshold transition to existing flooring. Sliding & Patio Doors in Davie
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Davie
Window installation in Davie means retrofitting 1970s-1990s CBS ranch homes with original aluminum units that leak air, conduct heat, and carry zero impact rating against HVHZ wind loads. We specify Miami-Dade NOA-certified products from PGT, CGI, CWS, ES Windows, or ECO Window Systems, measure every opening with laser sightline tools, and produce a written quote that cannot differ from the survey document. Our Window Installation crews are background-checked, uniformed, and identified by license number before arrival under Haven Clause 3.
Single & Double Hung Windows
Signs you need it
Sashes that won’t stay open, visible daylight through weatherstripping, or aluminum frames with white oxidation streaks on the exterior indicate the unit has exceeded its service life.
What it costs in Davie
Standard vinyl single or double hung installation runs $650-$1,200 per opening; impact-rated units with laminated glass and reinforced frames range $1,800-$2,800.
How we do it
We remove the existing frame, inspect the rough opening for CBS irregularities common to 1970s Davie construction, install the new unit with HVHZ-approved fasteners at specified intervals, seal with backer rod and silicone, then photograph the completed installation for the documented photo record.
Horizontal Roller Windows
Signs you need it
Roller wheels that grind, tracks packed with corrosion, or frames that rack when operated signal the rolling mechanism and possibly the frame itself are failing.
What it costs in Davie
Horizontal roller replacement in standard sizes costs $700-$1,300 for non-impact and $1,900-$3,000 for impact-rated with stainless steel rollers and reinforced interlocks.
How we do it
We measure track width and sill slope with digital calipers, order the unit with the correct screen configuration and NOA documentation, install with shimming to correct out-of-level conditions common in older ranch slabs, then test operation and lock engagement before the customer signs the completion checklist.
What Window Installation Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Standard vinyl single/double hung | $650 - $1,200 |
| Impact-rated single/double hung | $1,800 - $2,800 |
| Impact horizontal roller | $1,900 - $3,000 |
How long does window installation take in Davie?
Most Davie ranch-home retrofits complete in 2-4 days for 12-18 openings, with Broward County inspections scheduled between installation phases. Call (754) 254-8492 for a timeline based on your specific opening count and permit status.
Do you pull permits for window replacement in Davie?
Yes, we pull all Broward County permits and schedule required inspections; every product carries a valid Miami-Dade NOA or Florida Product Approval before it reaches your property. Call (754) 254-8492 to confirm your project’s permit path.
Door Installation in Davie
Door installation in Davie centers on replacing original aluminum sliders and hollow-core entries on 1970s-1990s ranches with HVHZ-rated impact units that meet Broward County’s strict wind-load requirements. We specify Therma-Tru entry systems and impact-rated patio doors from PGT or CGI, measure rough openings for squareness and header load, and produce a written quote you keep before any work begins. Our Door Installation service covers everything from standard entries to 8-foot-plus paddock sliders on equestrian lots.
Hurricane-Proof Front & Entry Doors
Signs you need it
Steel doors with rust bubbling at the bottom edge, wood frames with soft spots from sprinkler contact, or any entry door without a Miami-Dade NOA label in an HVHZ zone need replacement.
What it costs in Davie
Impact-rated fiberglass entry door systems with multi-point locking and HVHZ hardware run $2,200-$4,500 installed, including frame replacement and threshold adjustment.
How we do it
We measure the rough opening, verify header capacity for the weight of laminated glass or solid-core impact units, install with HVHZ-approved long screws into framing, adjust sweep and strike for positive seal, and document with pre- and post-installation photographs.
French & Double Doors
Signs you need it
Active-door sag causing misalignment at the astragal, weatherstripping compression set, or single-pane glass without impact rating in a door that faces prevailing winds.
What it costs in Davie
Impact-rated French door pairs with laminated glass and reinforced hinges cost $3,500-$6,500 depending on width, height, and hardware finish selection.
How we do it
We verify the subsill is level across the full width, install the frame with shimming to prevent racking common in ranch-slab settlement, align active and inactive doors at multiple points, and test multi-point lock engagement before final sealant application.
What Door Installation Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Impact-rated entry door system | $2,200 - $4,500 |
| Impact French/double door pair | $3,500 - $6,500 |
| Standard patio slider replacement | $1,800 - $3,200 |
Can you match my door size on an equestrian property?
Yes, we measure oversized openings up to 12 feet wide on Davie ranch homes and specify custom-ordered HVHZ-rated sliders with engineered headers and reinforced tracks; lead times extend 4-8 weeks for non-stock widths. Call (754) 254-8492 to schedule measurement of your specific opening.
Do French doors qualify for the same impact rating as windows?
Yes, our French door pairs carry identical Miami-Dade NOA ratings to our impact windows, with design pressures matched to your home’s exposure category and corner zone requirements. Call (754) 254-8492 for the NOA documentation on any product we specify.
Energy-Efficient Windows in Davie
Energy-efficient windows in Davie address the specific heat gain from original single-pane aluminum units on ranch homes where air conditioning runs 10 months a year and FPL bills peak above $400 in summer. We specify low-E coatings, argon gas fill, and insulated laminated glass from ECO Window Systems and Mr-Glass, with U-factors and SHGC values selected for Broward’s cooling-dominated climate, not northern heating loads. Our Energy-Efficient Windows service includes blower-door-informed recommendations when whole-home performance is the goal.
Low-E & Argon Gas Glass
Signs you need it
Rooms with south or west exposure that stay hot after sunset, carpet or upholstery fading near windows, or condensation between panes on dual-pane units that have lost their seal.
What it costs in Davie
Low-E/argon dual-pane replacement in standard vinyl frames costs $750-$1,400 per opening; impact-rated low-E with insulated laminated glass runs $2,000-$3,200.
How we do it
We calculate solar heat gain coefficient by orientation, specify the appropriate low-E coating for each elevation, verify argon fill at the factory with certification, and install with thermal-break frames to reduce conduction through the aluminum or vinyl profile.
UV-Blocking & Fade Protection
Signs you need it
Hardwood floors, artwork, or furniture near windows showing discoloration within 2-3 years of placement, especially in rooms with unshaded south exposure.
What it costs in Davie
UV-blocking upgrade to standard low-E units adds $80-$150 per opening; dedicated fade-protection laminated glass in impact-rated frames runs $2,200-$3,500.
How we do it
We measure UV transmission at the glass surface with a meter, specify interlayers or coatings that block 99% of UV-B and UV-A, install with proper edge clearance to prevent thermal stress, and document the visible light transmission percentage on the written scope.
What Energy-Efficient Windows Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Low-E/argon dual-pane (non-impact) | $750 - $1,400 |
| Impact-rated low-E with insulated laminate | $2,000 - $3,200 |
| UV-blocking upgrade or dedicated fade glass | $2,200 - $3,500 |
Will energy-efficient windows lower my FPL bill in Davie?
Yes, replacing single-pane aluminum with low-E/argon impact-rated units typically reduces cooling load 15-25% on a 1,800-square-foot ranch, with payback in 6-10 years depending on current usage and shading. Call (754) 254-8492 for a load calculation based on your specific home orientation and window count.
Do you install ViewLux energy-efficient windows in Davie?
Yes, we specify ViewLux lines where the U-factor and SHGC combination matches the home’s cooling-dominated load profile, with written performance data on the quote before you commit. Call (754) 254-8492 to see ViewLux specifications against your current FPL usage history.
Impact Garage Doors in Davie
Impact garage doors in Davie are required under Broward County HVHZ code for any door larger than 9 feet wide or any garage with conditioned space above, which includes many ranch homes with converted attics or attached workshops. We specify wind-load-rated sections from Mr-Glass and Therma-Tru with Miami-Dade NOA documentation, measure track radius and headroom for opener compatibility, and produce a written quote that includes permit fees and inspection scheduling. Our Impact Garage Doors service addresses the common problem of original non-rated doors on homes that have never been fully brought to current code.
Hurricane-Rated Garage Doors
Signs you need it
Any garage door without a visible Miami-Dade NOA sticker, panels that rattle in moderate winds, or a door installed before 2002 when HVHZ garage door requirements tightened significantly.
What it costs in Davie
Impact-rated steel or aluminum garage door systems with reinforced tracks and heavy-duty hardware cost $2,800-$5,500 for a standard two-car opening, including removal and disposal.
How we do it
We measure the opening for squareness and headroom, specify the wind-load rating based on exposure and structure height, install reinforced tracks with HVHZ-approved anchors, balance and test spring tension, and photograph the installed NOA label and hardware for the documented record.
Wind-Load Code Compliance
Signs you need it
Permit records showing the garage door was not part of a previous impact upgrade, or a home sale inspection flagging the garage door as non-compliant with current Broward County HVHZ standards.
What it costs in Davie
Full code-compliance upgrade with permit, inspection, and NOA-certified door system runs $3,200-$6,000 depending on opening size and whether the existing track and spring system can be reused.
How we do it
We pull the Broward County permit, specify the design pressure from the Florida Building Code table for Davie’s wind speed and exposure category, install with continuous load path to the structure, and schedule the required inspection before final release.
What Impact Garage Doors Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Hurricane-rated garage door system | $2,800 - $5,500 |
| Code-compliance upgrade with permit | $3,200 - $6,000 |
| Track and spring replacement only | $800 - $1,500 |
Does my garage door need impact rating if my windows are already upgraded?
Yes, Broward County HVHZ requires garage doors to meet wind-load standards independently; a home with impact windows but a non-rated garage door fails inspection and may void windstorm insurance discounts. Call (754) 254-8492 for a code-compliance review of your entire envelope.
Can you reuse my garage door opener with a new impact door?
Sometimes, if the opener has sufficient horsepower for the heavier impact-rated sections and the track radius matches; we measure and test during the survey and tell you in writing whether replacement is required. Call (754) 254-8492 to include opener assessment in your measured survey.
Custom & Geometric Windows in Davie
Custom and geometric windows in Davie solve the architectural mismatch between original ranch-home openings and standard rectangular stock units, particularly in gable ends, entry foyers, and converted equestrian-barn structures. We measure radius, chord length, and springline for arched units, specify true custom shapes from ViewLux and PGT with Miami-Dade NOA documentation, and produce a written quote that includes templating fees and extended lead times. Our Custom & Geometric Windows service handles everything from half-round accent windows to full custom assemblies on unique properties.
Geometric & Shaped Windows
Signs you need it
Existing shaped windows with cracked or fogged glass where the original manufacturer is out of business, or new construction on a Davie equestrian property requiring gable-end triangles or trapezoids to match the roof pitch.
What it costs in Davie
Geometric shapes in vinyl or aluminum with standard glass run $900-$1,800; impact-rated custom geometries with laminated glass and reinforced frames cost $2,500-$5,000 depending on complexity and size.
How we do it
We create a physical or digital template of the opening, submit to the manufacturer with NOA requirements specified, receive and inspect the unit for glass and frame integrity, install with custom flashing to match the irregular shape, and photograph the completed installation from inside and out.
Arched & Curved Windows
Signs you need it
Original arched windows with rotted wood frames, failed insulated glass in the curved top section, or a desire to add architectural interest to a plain ranch gable end.
What it costs in Davie
True radius arched windows with custom jamb extensions cost $1,200-$2,400 for non-impact and $3,000-$6,500 for impact-rated with Miami-Dade NOA and heavy-duty hardware.
How we do it
We measure the radius and springline with a digital measuring tool, specify the unit with the correct rise and width, fabricate custom jamb extensions for the arched rough opening common in 1970s ranch construction, install with shimming to maintain the curve, and seal with backer rod and color-matched silicone.
What Custom & Geometric Windows Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Geometric shapes (standard glass) | $900 - $1,800 |
| Impact-rated custom geometry | $2,500 - $5,000 |
| True radius arched (impact-rated) | $3,000 - $6,500 |
How long do custom windows take to arrive in Davie?
Standard custom geometries ship in 6-10 weeks; true radius arches and oversized custom assemblies run 10-14 weeks due to Miami-Dade NOA testing requirements and single-factory sourcing for HVHZ products. Call (754) 254-8492 to confirm current lead times for your specific shape and size.
Can you match an existing arched window I can’t identify?
Yes, we template the existing unit in place, measure radius, chord, and springline to thousandths, and specify a replacement from our custom lines that matches the sightline and operation without requiring surrounding trim replacement. Call (754) 254-8492 to schedule templating of your unidentified arched unit.
Brands We Service in Davie
We install and service eight manufacturer lines in Davie: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Parts for Mr-Glass and Therma-Tru are stocked locally for faster turnaround on warranty and repair calls. See our brands for specifications by performance tier and price range.
Pricing for Windows & Doors in Davie, FL
| Service | Typical range in Davie |
|---|---|
| Standard vinyl single/double hung window | $650 - $1,200 |
| Impact-rated single/double hung window | $1,800 - $2,800 |
| Impact horizontal roller window | $1,900 - $3,000 |
| Impact entry door system | $2,200 - $4,500 |
| Impact French/double door pair | $3,500 - $6,500 |
| Low-E/argon dual-pane (non-impact) | $750 - $1,400 |
| Impact-rated low-E with insulated laminate | $2,000 - $3,200 |
| Hurricane-rated garage door system | $2,800 - $5,500 |
| Custom geometric shapes (standard glass) | $900 - $1,800 |
| Impact-rated custom geometry | $2,500 - $5,000 |
| True radius arched (impact-rated) | $3,000 - $6,500 |
Prices in Davie push toward the higher end when openings require custom HVHZ-rated products for non-standard sizes, when existing frame conditions demand structural repair, or when equestrian-property access limits crew efficiency. Every quote is written before work starts under Haven Clause 1; the measurement and the final invoice reference the same document.
Neighborhoods We Serve in Davie
We measure, specify, and install across Davie’s equestrian neighborhoods and standard subdivisions alike, with crews dispatched from our South Florida scheduling office and routing optimized for Broward County permit jurisdictions.
- Long Lake Ranches
- Timberlake
- Shenandoah
- Stonebrook
- Paradise Village
Most Davie properties receive survey scheduling within 2-3 business days of call, with installation following permit approval.
Service Area - Cities Near Davie
Our crews serve the full Broward County HVHZ corridor from Davie, including Cooper City, FL to the west with its similar ranch-home stock, Plantation, FL to the north with its mix of 1970s and newer construction, Pembroke Pines, FL to the south with its large-scale developments, and Sunrise, FL to the east with its commercial and residential blend. All jobs carry the same Haven Standard guarantees and Miami-Dade NOA product requirements.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Davie
Yes, Broward County requires permits for all window and door replacements in Davie’s HVHZ zone, with Miami-Dade NOA or Florida Product Approval required before permit issuance; we pull all permits and schedule inspections as part of every job scope.
All of Davie lies within Broward County’s High-Velocity Hurricane Zone, so current code requires impact-rated or protected openings for any replacement; if your home was built before 2002 and still has original windows, they are almost certainly non-impact and need full upgrade.
Yes, our crews are experienced with equestrian-property access, scheduling work to minimize disruption to paddock routines and maintaining gate protocols; we document any special access requirements on the measured survey you keep.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Davie Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.