Bay & Bow Windows in Davie, FL

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Bay & Bow Windows in Davie, FL

Bay and bow windows are multi-panel window assemblies that project outward from the exterior wall, creating an interior shelf or seat and a wider sightline to the outside. In Davie, FL, a properly specified and installed bay or bow unit needs to handle South Florida’s heat load, seasonal humidity, and hurricane exposure – which changes what glass, framing, and flashing the job calls for compared to almost anywhere else in the country. At Sightline Windows & Doors Davie, we’ve installed bay and bow windows across Davie’s mix of ranch homes, newer construction in Country Isles, and the larger lots along Griffin Road since 2012, and every window installation started with a written price before a single tool came off the truck.

If you’re exploring this option as part of a broader window replacement project, our Window Installation in Davie page covers the full scope of what we do and how we document it. To talk through a specific opening, call us at (754) 254-8492 – a live person answers, not a voicemail.

What Bay Windows and Bow Windows Actually Are

The two terms get used interchangeably, but they’re different configurations. A bay window is typically three panels: a fixed or operable center unit flanked by two angled side units, most often at 30 or 45 degrees, unlike casement windows which hinge at the side. The projection creates a defined alcove inside the room. A bow window uses four, five, or six panels arranged in a gentle curve, so the projection reads as an arc rather than a sharp angle. Bow configurations are more common in longer wall spans – you’ll see them on the front elevations of larger homes in Davie’s Imagination Farms neighborhood, where the curved profile softens a wide facade.

Both configurations share the same structural requirement: the wall cavity above the opening needs a properly sized header, and the exterior projection needs a roof – usually a hip or shed roof – that’s flashed and sealed to the main wall. In Davie’s climate, that flashing detail is where failures originate. Water intrusion at the junction between the bay roof and the main wall accounts for the majority of repair calls we see on units installed by others. Our measured survey documents the framing condition and the roof-to-wall connection before we quote anything, because those conditions drive the labor side of the estimate.

When You Need Bay & Bow Windows

• You’re losing usable floor area to a flat wall in a smaller room. In Davie ranch homes – particularly the 1,400-to-1,800 square-foot layouts common in Arrowhead and Laurel Oaks – a bay projection of even 18 to 24 inches adds a functional window seat or plant shelf without a room addition permit.
• Your existing bay or bow unit is leaking at the roof junction. If you’re seeing water stains on the interior sill or on the drywall below the unit, the flashing at the bay roof has likely failed. Davie gets an average of 62 inches of rain annually, and a small flashing gap compounds fast in that environment.
• The glass in your current unit is single-pane or early double-pane without a low-SHGC coating. South Florida’s solar heat gain can push a west-facing bay window’s interior surface temperature well above ambient room temperature, raising cooling loads noticeably. Modern low-emissivity glass with a solar heat gain coefficient below 0.25 addresses that directly.
• Your home was built before 2002 and the window isn’t rated for current Florida Building Code wind loads. Davie sits in Broward County, which requires impact-rated glazing or a secondary protection system for new and replacement windows. Older bay units with standard annealed glass don’t meet that standard.
• You’re preparing for a sale and the front elevation looks dated. A bow window on the street-facing wall changes the proportions of a facade in a way that a flat replacement window can’t. We see this request consistently from homeowners in Davie’s Pine Island Ridge and Regency Lakes areas who are renovating before listing.
• The framing around an existing bay is soft or shows signs of rot. Wood framing in Davie’s humidity doesn’t tolerate a compromised moisture barrier for long. If you press the wood around the exterior casing and it gives, the structural condition of that opening needs to be documented before any window discussion starts – which is exactly what our measured survey covers.

Before

After

Our Bay & Bow Windows Process

1. Measured survey and opening documentation. A background-checked, uniformed Sightline technician visits the opening and records frame dimensions, wall depth, exterior projection space, existing header size, and the condition of the bay roof if one is present. We photograph every relevant detail. The customer keeps this document – it becomes the basis of the written price, and the two cannot differ. This is Haven Clause 1: Have It in Writing.
2. Product specification and written quote. Based on the opening’s measurements and your home’s wind-load zone, we specify the unit – panel count, frame material, glass package, and whether the installation requires structural framing adjustments. For bay and bow windows in Davie, we typically draw from ES Windows for aluminum-framed impact units and ECO Window Systems for jobs where the thermal performance targets are the priority. The written quote names the product by model, the glass package by U-factor and SHGC, and the labor scope in plain English. No range on the written document – a number.
3. Permit coordination. Bay and bow window replacements in Davie require a Broward County building permit when the work involves structural modifications to the opening or when the unit is impact-rated as the primary protection system. We handle permit filing, and the permit number goes into the job record before installation starts.
4. Framing and structural preparation. If the existing header is undersized for the new projection width, we sister the framing before the unit goes in. Any soft or compromised wood identified in the measured survey is replaced and documented with photos. This step is what separates a bay window that performs for 20 years from one that leaks by year three.
5. Installation and flashing. The unit is set, leveled, and anchored to the rough opening per manufacturer spec and Florida Building Code requirements. The bay roof – if new – is framed, sheathed, and flashed at the wall junction using self-adhering modified bitumen membrane before any finish material goes on. Exterior trim and interior stool and apron are fitted and caulked.
6. Photo record and 365-Day Done Right Promise. When the job is complete, we photograph the finished installation from the exterior and interior, document the flashing detail, and add the photos to the job record the customer already holds. The 365-Day Done Right Promise – Haven Clause 5, No Surprises – covers the installation: if it’s not done right, we make it right, in writing, not as a courtesy call.

Bay & Bow Windows Pricing in Davie

Bay and bow windows cost more than flat replacement windows of the same width because they involve more glass area, a structural projection, and a roofed assembly that has to be weatherproofed, while horizontal roller windows stay flush with the wall. In Davie’s market, here’s what the numbers look like in 2025-2026:

A few factors specific to Davie that affect where your job lands in these ranges:

• Impact-rated glass is standard here, not an upgrade. Broward County’s wind-borne debris region requirements mean non-impact glass in an unprotected opening doesn’t pass inspection. Both ES Windows and ECO Window Systems manufacture impact-rated bay configurations we regularly spec for Davie homes; the glass package is built into the base quote.
• West-facing openings often require a lower SHGC than east or north-facing ones. A unit facing west on Griffin Road will carry a higher-performance glass spec – and a slightly higher material cost – than the same frame configuration on a north-facing wall. The measured survey records the orientation, and the quote reflects it.
• Older homes in western Davie near Tree Tops Park often have thicker wall assemblies – masonry or CBS construction with furring – that require a deeper bay frame or additional blocking. We document wall depth at the survey so there’s no surprise in the labor line at install.
• The bay roof condition matters. If an existing bay roof is sound and properly flashed, we integrate the new unit into it. If the roof needs to be rebuilt – which is common on units more than 15 years old in Davie’s climate – that labor is in the written quote before work starts, not added afterward.

Every estimate from Sightline is written, specific to the opening we measured, and yours to keep whether or not you hire us. If you already have a quote from another installer, bring it in – we’ll give you a free second opinion on any written estimate, compare specs line by line, and tell you what you’re actually comparing.

Call (754) 254-8492 for a no-cost estimate. The number on the phone is the number on the quote.

FAQs – Bay & Bow Windows

How much does a bay window installation cost in Davie, FL?

A three-panel impact-rated bay window in Davie typically runs between $2,800 and $5,400 installed, depending on frame material, glass package, and the condition of the existing opening. Bow windows with four or five panels run $4,800 to $9,500 installed. Those ranges reflect Broward County’s impact-glass requirement, which is standard in every Sightline quote – not a line-item add-on. For an exact number tied to your specific opening, call (754) 254-8492; the estimate is written and free.

Do bay and bow windows require a permit in Davie?

Yes, in most cases. Any replacement window that serves as the primary wind-borne debris protection system – which impact-rated bay and bow units do – requires a Broward County building permit. Structural modifications to the opening, like header work or wall framing changes, also trigger the permit requirement. Sightline handles permit filing on every job where one is required; the permit number goes into the job record before installation begins.

Can a bay or bow window handle South Florida hurricane conditions?

An impact-rated bay or bow window – with laminated glass meeting Florida’s large-missile impact standard and a frame tested to the applicable wind-load category – can serve as the primary protection system without shutters. The key is the product specification: the frame, the glass interlayer, and the anchoring method all have to be rated and installed per the tested assembly. Units we specify from ES Windows and ECO Window Systems carry current Florida Product Approvals; we document the approval number in the written quote. A standard or decorative bay unit with annealed glass cannot make that claim and won’t pass a Broward County inspection.

How long does a bay or bow window installation take in Davie?

Most single-opening bay or bow window installations take one full day on-site, assuming the framing condition matches what the measured survey documented. If structural framing or header work is needed – which we identify at the survey and include in the written scope – the job may run into a second day. Permit processing in Broward County currently adds two to four weeks between the written quote and the installation date; we track that timeline and keep you updated. The photo record from the completed job is in your hands the same day the crew leaves.

Key Takeaways

• Bay windows use three angled panels; bow windows use four to six curved panels – both project from the wall and require a roofed exterior assembly that needs proper flashing for South Florida conditions.
• Impact-rated glass is required in Davie (Broward County wind-load zone) and is included in every Sightline quote as standard.
• Installed cost in Davie ranges from $2,800 for a basic three-panel bay to $9,500 for a five-panel impact bow; framing repairs add $400 to $1,800 if needed.
• Every job begins with a measured survey the customer keeps; the written quote and that survey are the same document – Haven Clause 1.
• The 365-Day Done Right Promise covers every installation in writing.
• Sightline has documented more than 18,000 window and door openings since 2012, all with a written price before work started and a photo record when it finished.
• Our home page covers the full range of services Sightline provides across South Florida.

Get a Written Price for Your Bay or Bow Window in Davie

If you’re ready to measure the opening and put a number on it, call Sightline Windows & Doors Davie at (754) 254-8492. A live person answers. We’ll schedule the measured survey at a time that works for you, document the opening, and hand you a written quote before any work is discussed – that’s how every job we do starts, and it’s the same process whether the job is a single bay unit in a Davie ranch home or a five-panel bow on a larger custom property. If you’re still comparing options, our Window Installation in Davie page explains the full scope of what we install and how the Haven Standard applies to every opening we touch.

Written by Sonia Raman, Owner at Sightline Windows & Doors Davie, serving Davie.