Sliding & Patio Doors in Davie - Free Measure, Exact Written Quote

Trusted Sliding & Patio Doors for Davie Homeowners

Sliding and patio door installation and replacement in Davie typically runs $2,800-$8,500 depending on size, glazing specification, and whether the unit is impact-rated for the South Florida Building Code. Most measured surveys in Davie, Cooper City, and Plantation are scheduled within 48 hours, and the written quote you receive is the same document our crew uses for installation - no change orders, no surprises. Call (754) 254-8492 to book your measured survey.

Call (754) 254-8492

We’ve installed and replaced Coral Springs sliding and patio doors and units across Davie since 2012 - from the single-story ranch homes near Flamingo Gardens to the newer construction in Pine Island Ridge and the townhome clusters along Stirling Road. Every one of those 18,000+ openings left with a written price before work started and a documented photo record when it finished. That’s Haven Clause 1 (Have it in writing) and Haven Clause 4 (Evidence on every job), and it’s how we operate whether we’re specifying a standard vinyl slider for a rental property or a thermally broken aluminum impact door for a waterfront home off SW 39th Street.

Davie’s location on the edge of the Everglades means your patio door faces specific stressors: sustained humidity that degrades weatherstripping, afternoon thunderstorms that test drainage channels, and the occasional tropical system that makes impact-rated glazing not optional but code-required in certain zones. We specify products for what your opening actually faces, not for what our warehouse happens to stock.

What Our Sliding & Patio Doors Service Includes

Patio Doors

A patio door is any large-format door system that opens your interior to exterior living space - typically sliding, swinging, or folding configurations. In Davie, we see the highest demand for 2-panel and 4-panel sliding systems on homes built between 1985 and 2010, where original aluminum frames have reached thermal and operational end-of-life. We measure your rough opening to the sixteenth, specify the correct frame depth for your wall assembly, and deliver a written quote that includes the unit, installation, permit handling, and debris removal.

Impact Sliding Glass Doors

Impact sliding glass doors combine laminated glass, reinforced frames, and multi-point locking to meet Miami-Dade and Broward County hurricane codes without secondary shutters. Davie sits in a mixed wind-borne debris zone - some addresses require impact rating, others don’t - and we verify your specific requirement through the Broward County Property Appraiser’s GIS before specifying. Our impact lines from ES Windows and ECO Window Systems carry HVHZ (High Velocity Hurricane Zone) approval, and we document the NOA (Notice of Acceptance) number on your written quote so you have it for insurance and resale.

Sliding Glass Door Replacement

Replacement becomes necessary when rollers fail, frames corrode, glass fogs between panes, or the weatherstripping no longer seals against Davie’s driving rain. We don’t install a replacement unit until we’ve diagnosed why the original failed - in Davie, we regularly find calcium buildup on lower tracks from irrigation overspray, and we address the source so your new door doesn’t suffer the same fate. The measured survey includes frame squareness readings, sill condition documentation, and a photo record you keep.

Impact French Patio Doors

French patio doors - hinged, typically double - offer wider clear openings and a different aesthetic than sliders. In Davie’s Plantation-adjacent neighborhoods and the Cooper City border areas, we install impact-rated French systems where homeowners want the traditional look with code compliance. These units require precise hinge-side framing and proper sill pan flashing for water management; our crews are trained to the manufacturer’s specific installation manual, not a generic “good enough” approach. Therma-Tru impact fiberglass French doors are a frequent specification for their thermal performance and paintable surface.

Screen Door Installation

Screen doors for sliding patio systems - whether retractable, sliding, or hinged - extend usable living space without admitting insects. Davie’s mosquito pressure is year-round, and a properly fitted screen with extruded aluminum frame and stainless mesh outlasts the big-box alternatives by a decade. We measure for screen integration with your primary door’s operating hardware, and we specify mesh density based on whether you need standard insect protection or no-see-um barrier for properties near the wetland edge.

Brands We Service for Sliding & Patio Doors

We work with eight manufacturer lines, specified by what your opening requires, not by what earns margin. For sliding and patio doors in Davie, we most frequently draw from ES Windows, whose thermally broken aluminum impact sliders carry HVHZ approval and suit the modern aesthetic common in Pine Island Ridge and Ridgeview renovations; ECO Window Systems, a South Florida-manufactured line with competitive lead times for standard vinyl and aluminum configurations; and Mr-Glass, whose laminated impact products we specify when optical clarity and edge stability are priorities. We’ve installed hundreds of units from each of these lines, maintain direct distributor relationships, and stock common hardware for service calls.

We also work regularly with Therma-Tru for fiberglass French and swing patio systems, particularly where thermal performance and paint finish longevity matter. Whether you have one of these brands, another from our verified lines, or a unit we didn’t originally install, we can service, repair, or replace it. Our measured survey identifies the manufacturer, series, and age if tags are present, and we research the specifications if they’re not.

Before

After

Signs You Need Sliding & Patio Doors Right Now

• The door requires shoulder force to move. A slider that sticks, jumps, or needs two hands has failed rollers, bent track, or frame racking. In Davie’s hard-water environment, we see track pitting and roller bearing corrosion that progresses from annoyance to inoperability - and a door you can’t open is a door you can’t escape through in an emergency.
• Visible moisture between glass panes. Fogging or condensation inside an insulated glass unit means the seal has failed and the inert gas has escaped. The thermal performance is gone, and in Davie’s cooling-dominated climate, you’re paying to air-condition the gap between the panes. Replacement of the glass or the full unit is the only remedy.
• Daylight visible around the closed door perimeter. Gaps at the jamb, head, or sill mean weatherstripping has compressed, the frame has settled, or the installation was never properly sealed. Davie’s afternoon thunderstorms drive water through gaps that seem minor; we’ve documented sill rot in homes where a 1/8-inch gap went unaddressed for two rainy seasons.
• The frame is corroded, cracked, or pulling from the wall. Aluminum frames in coastal-adjacent Davie oxidize, vinyl frames UV-degrade, and wood frames - where they exist - absorb moisture from the humid air. Structural frame failure compromises security, weather protection, and the structural integrity of the wall assembly itself.
• You’re replacing windows and the patio door doesn’t match. Aesthetic coherence matters for resale, but more importantly, mismatched eras of glazing technology create thermal bridges and pressure differentials. If your new windows are impact-rated and your 1997 slider is not, you’ve created a weak point the building code - and any buyer’s inspector - will flag.

Our Sliding & Patio Doors Process - Step by Step

1. 1
   Measured survey and documentation. Our technician arrives in a marked vehicle, uniformed, with license number provided in advance per Haven Clause 3 (Verified Crews). We measure the rough opening width, height, and squareness to the nearest 1/16 inch; photograph the existing unit, frame condition, and surrounding wall; and record any site conditions (low header, concrete sill, interior floor height variation) that affect specification. You keep a copy of the measured survey.
2. 2
   Written quote with product specification. Haven Clause 1 means the price is written before any work starts. Your quote includes the manufacturer, series, size, glazing package, U-factor and SHGC ratings, hardware finish, installation scope, permit fees if applicable, and debris removal. The measurement document and the quote are the same document - they cannot differ.
3. 3
   Permit application and scheduling. For replacement units in Davie, permit requirements vary by municipality and by whether the work is considered like-for-like or a change in egress. We pull permits when required, schedule inspections, and pass them. You receive the inspection documentation for your records.
4. 4
   Installation by verified crews. The same technician who measured often leads the installation team, ensuring continuity. We remove the existing unit, inspect and repair the rough opening as needed, install the new door per manufacturer specifications with proper sill pan flashing and sealant, and verify operation, lock engagement, and drainage function before cleanup.
5. 5
   Photo record, walkthrough, and warranty documentation. Haven Clause 4 (Evidence on every job) means you receive dated photographs of the completed installation, including frame-to-wall sealant detail and hardware operation. We walk through the finished work with you, verify your satisfaction, and provide the 365-Day Done Right Promise in writing. If it’s not done right, we make it right - stamped on every job, not offered as a courtesy.

How Much Does Sliding & Patio Doors Cost in Davie?

Sliding & Patio Doors Near Davie - Our Service Area

We install and replace sliding and patio doors across Davie and the surrounding municipalities, including Cooper City, Plantation, Pembroke Pines, Sunrise, Lauderhill, Weston, Miramar, Lauderdale Lakes, Hollywood, Tamarac, Miami Gardens, and the unincorporated pockets of central Broward. From our Davie base, typical drive times range from 15 minutes to most of these cities to 35 minutes for the southern and eastern extents. We schedule measured surveys with 2-hour arrival windows, and our live phone coverage means you confirm, modify, or ask questions about your appointment without voicemail queues.

Frequently Asked Questions - Sliding & Patio Doors in Davie

Schedule Your Sliding & Patio Doors Service in Davie Today

Call (754) 254-8492 to schedule your free measured survey and written estimate. You’ll speak with a live person, 24/7 - no voicemail queue, no callback window. Our technician will arrive uniformed and identified, measure your opening to the sixteenth, and leave you with a documented quote that is the same document we use for installation. Since 2012, every one of our 18,000+ openings has started with that written price and finished with a photo record. That’s the Haven Standard, and it’s how we work in Davie.

Written by Sonia Raman, Owner at Sightline Windows & Doors Davie, serving Davie, Cooper City, Plantation, and central Broward since 2012.