Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTrusted Impact Windows & Doors for Davie Homeowners
Impact windows and doors in Davie typically run $650-$2,400 per opening depending on size, glazing specification, and whether the installation meets High-Velocity Hurricane Zone (HVHZ) code. Most Davie homes built between 1985 and 2015 have original windows that fail current wind-load requirements for Broward County, and a full opening replacement under the Haven Standard takes one to three days with the written price fixed before any work starts. Call (754) 254-8492 to schedule your measured survey - the document you keep and the quote you pay are the same page.
We’ve installed 18,000+ windows and doors since 2012, every one with a written price before work started and a documented photo record when finished. Davie’s position on the edge of the Everglades exposes homes to sustained easterly winds that standard windows aren’t tested for, similar to the conditions addressed by Impact Windows & Doors in Fort Lauderdale. The 365-Day Done Right Promise covers every installation we complete in Davie, and our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3 (Verified Crews). Live phone coverage is available 24/7, not a callback queue.
What Our Impact Windows & Doors Service Includes
Impact-Resistant Windows
Impact-resistant windows use laminated glass bonded to an interlayer that holds shards in place when struck by wind-borne debris. In Davie, we specify these for every opening below 30 feet in height where the basic wind speed hits 175 mph per ASCE 7. Our measured survey records frame squareness, rough opening dimensions, and existing sill condition - the customer keeps this document, and the written quote cannot differ from it.
Hurricane Impact Windows
Hurricane impact windows are tested to ASTM E1886 and E1996 standards for large and small missile impact, then cycled for pressure. Davie sits in a zone where insurance underwriters increasingly require these ratings for premium discounts. We specify PGT and CGI lines for hurricane-rated openings, matching the product to the exposure - eastern facades get higher DP ratings than protected western walls.
Single Hung Impact Windows
Single hung impact windows have a fixed upper sash and a lower sash that tilts inward for cleaning. They’re the standard replacement for Davie’s ranch and split-level homes built in the 1970s and 1980s, where the original aluminum frames have corroded at the weep holes. We measure stack height, jamb depth, and existing sash weight to specify the correct balance system - the quote includes this data, not a square-foot guess.
Double Hung Impact Windows
Double hung impact windows allow both sashes to operate, which matters in Davie’s climate for natural ventilation during the November through April dry season. We install these in two-story homes where upper-floor egress is required by code, and we verify the egress clear opening width and height during our survey - the measurement goes on the document you keep.
Horizontal Roller & Sliding Impact Windows
Horizontal roller windows operate on a track system ideal for wide openings facing patios and pool enclosures common in Davie’s Ivanhoe and Shenandoah neighborhoods, and we also install Impact Windows & Doors - Margate. The rollers carry significant weight, so we measure sash mass and specify stainless steel or polymer rollers based on opening width. ES Windows and ECO Window Systems both produce horizontal rollers we regularly specify for Davie’s mid-century modern and contemporary homes.
Vinyl Impact Windows
Vinyl impact windows use multi-chambered PVC frames with internal reinforcement and welded corners. The material doesn’t corrode in Davie’s high-humidity environment, and the thermal break performance exceeds aluminum. We specify vinyl for energy-efficient retrofits where the homeowner wants to reduce cooling load - the U-factor and SHGC ratings are printed on the quote, not promised verbally.
Wind Mitigation & HVHZ Code Compliance
Wind mitigation inspection reports document opening protection for insurance discounts in Florida. Davie is not full HVHZ, but Broward County amendments apply stricter requirements than the Florida Building Code base. We pull permits through the Town of Davie Building Division, schedule inspections, and pass them - the permit number and inspection results are part of the documented photo record you receive.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Impact Windows & Doors
We work with eight manufacturer lines, specified by what the opening requires, not by what is in stock. For impact-rated aluminum, we regularly install PGT WinGuard and CGI Estate Collection products - we’ve completed hundreds of openings with these lines and stock common hardware and glazing components. ES Windows and ECO Window Systems produce vinyl and hybrid frames we specify for Davie homes where thermal performance is the priority; their extrusion wall thicknesses and reinforcement schedules are documented in our quotes. Mr-Glass supplies custom laminated glass configurations for oversized openings and geometric shapes that standard catalog products don’t cover.
Therma-Tru produces impact-rated fiberglass and steel entry door systems we pair with sidelites and transoms for full-entryway replacement. ViewLux manufactures high-end aluminum impact windows for contemporary architecture in Davie’s newer construction. Whether you have PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, or ViewLux - or any other make - we can service, repair, or replace it. Our Free Second Opinion on Any Written Estimate applies to competitor quotes specifying any of these brands.
Before
AfterSigns You Need Impact Windows & Doors Right Now
- Visible cracks or chips in existing glass. Even small cracks compromise the laminated interlayer’s ability to hold shards during impact. In Davie’s wind exposure, a cracked pane is a failed pane - and insurance adjusters document pre-existing damage to deny claims.
- Corrosion or pitting on aluminum frames. We see this regularly in Davie’s older neighborhoods near the C-11 canal basin, where salt air migrates inland. Pitted frames lose structural capacity; the frame, not just the glass, must resist wind pressure.
- Difficulty operating sashes or rollers. Binding sashes indicate frame racking or balance failure. In impact windows, operational force is part of the design specification - stiff operation means the frame or hardware is failing.
- Water intrusion during heavy rain. Staining on interior drywall below windows means the glazing bead, frame seal, or installation flashing has failed. Davie’s summer thunderstorms test every seal; recurring leaks damage framing and promote mold.
- Insurance renewal requiring opening protection documentation. Florida insurers are increasingly requiring wind mitigation forms with photo evidence of impact-rated products. If your windows lack the permanent AAMA or FBC marking, they won’t qualify - we document this during survey and install marked, certified products.
Our Impact Windows & Doors Process - Step by Step
- 1
Measured survey and documentation. We arrive with digital measuring tools, a level, and a camera. We record rough opening dimensions, frame squareness (diagonal measurements within 1/8 inch), sill condition, and exposure direction. You keep the measured survey; it’s the basis for the quote and the installation order.
- 2
Written quote with product specification. Haven Clause 1: the price is written before any work starts. The quote includes manufacturer, model, U-factor, SHGC, DP rating, and installation scope. The measurement and the quote are the same document - no change orders, no surprises.
- 3
Permit application and scheduling. We pull permits from the Town of Davie Building Division and schedule required inspections. The permit number is on your written scope. For HVHZ-compliant products, we submit the Florida Product Approval or Miami-Dade NOA documentation with the application.
- 4
Installation by verified crews. Haven Clause 3: the technician at your door is background-checked, uniformed, and identified by license number. Installation includes proper shimming, fastening to structural framing per manufacturer instructions, sealant application, and operational testing. We photograph each phase.
- 5
Final inspection, documentation, and warranty activation. The town inspector verifies code compliance; we pass the inspection and provide you the approved card. You receive the documented photo record of the completed installation and the 365-Day Done Right Promise in writing. If it’s not done right, we make it right.
How Much Does Impact Windows & Doors Cost in Davie?
A typical single hung impact window replacement in Davie runs $650-$1,100 per opening for standard sizes up to 40 by 54 inches, with vinyl frames at the lower end and aluminum at the higher. Double hung impact windows range $750-$1,300 depending on sash configuration and hardware grade. Horizontal roller impact windows for wide patio-facing openings run $900-$1,600. Full-entry door systems with impact-rated fiberglass or steel from Therma-Tru range $2,000-$2,400 including frame, hardware, and installation. Custom geometric shapes or oversized openings with Mr-Glass laminated configurations run higher - the quote names the price after measurement, not before.
Several factors move these ranges: frame material (vinyl, aluminum, or fiberglass), glazing specification (single laminate or insulating laminate with Low-E), opening size and accessibility, and whether the existing frame can be retrofitted or requires full removal. Homes in Davie’s older neighborhoods like College Park or Park City often need sill repair or structural reframing, which we document during survey and include in the written scope - not added later, just as we do for Coral Springs Impact Windows & Doors. To avoid overpaying, get a written quote that specifies manufacturer, model number, and performance ratings; vague “per square foot” pricing hides product downgrades. Our Free Second Opinion on Any Written Estimate lets you bring a competitor’s quote for review at no charge - we’ll identify where the specification differs from what the opening requires.
Every estimate includes the measured survey you keep, written scope of work, product specification with performance data, permit and inspection coordination, installation labor, debris removal, and the 365-Day Done Right Promise. Call (754) 254-8492 for an exact quote - estimates are free.
Impact Windows & Doors Near Davie - Our Service Area
We install and replace impact windows and doors throughout Davie and neighboring communities. Our typical response for a measured survey in Cooper City or Plantation is next business day; Pembroke Pines, Sunrise, and Lauderhill follow the same schedule. Weston, Miramar, Lauderdale Lakes, Hollywood, Tamarac, and Miami Gardens are within our regular service radius. Travel to outlying areas is noted in the written quote if applicable - no surprise trip charges. Whether your project is a single failed window in Davie’s Shenandoah neighborhood or a full-home replacement near the Bergeron Rodeo Grounds, the process is identical: measured survey, written price, verified crew, documented completion.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well, and we also provide Plantation Impact Windows & Doors. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Impact Windows & Doors in Davie
Impact windows and doors use laminated glass - two or more glass layers bonded to a tough interlayer - that holds together when struck by wind-borne debris. They’re tested to ASTM E1886 and E1996 standards for missile impact and pressure cycling, and they’re required or incentivized by insurance underwriters throughout Broward County including Davie. Unlike shutters or panels, impact windows provide continuous protection without deployment.
A typical single-opening replacement takes two to four hours; a full-home replacement of 15-25 openings takes one to three days depending on framing condition and weather. We schedule inspections with the Town of Davie Building Division in advance to avoid delays. The written scope includes the timeline - not an estimate, a commitment. Call (754) 254-8492 to schedule your measured survey and receive a written timeline with your quote.
Standard single openings run $650-$1,100 for vinyl or aluminum impact windows; full-entry door systems run $2,000-$2,400. Custom sizes, geometric shapes, and structural reframing increase cost. The only way to name an exact price is to measure - our estimates are free, and the written quote cannot differ from the measured survey. Call (754) 254-8492 for your exact quote.
Yes. We regularly install and service Therma-Tru impact entry systems and ES Windows vinyl and aluminum impact lines, and we stock common hardware and components for both. Our Free Second Opinion applies to competitor quotes specifying these brands - we’ll verify whether the quoted product matches your opening’s requirements. Whether you have Therma-Tru, ES Windows, or any other make, we can help.
Live phone coverage is available 24/7 for situations requiring immediate board-up or temporary weather protection after breakage or failed installation. Full replacement requires measurement, product ordering, and permit scheduling - these cannot be completed same-day. If you have an active water intrusion or security exposure from a failed window or door, call (754) 254-8492 and we’ll dispatch for temporary protection and schedule permanent replacement.
Every installation is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right - written into the Haven Standard, not a verbal assurance. Manufacturer warranties on PGT, CGI, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux products vary by line and are documented in your written scope. The documented photo record of your installation supports any warranty claim.
Clear a three-foot path around each interior opening and remove window treatments. Exterior access should be clear of furniture, planters, and obstructions. We protect floors and furnishings with drop cloths as part of standard installation. If you have alarm sensors on existing windows, notify your monitoring company - we don’t relocate electrical components. The written scope includes any site-specific preparation noted during survey.
Schedule Your Impact Windows & Doors Service in Davie Today
Call (754) 254-8492 to schedule your free measured survey. You’ll receive a written price before any work starts, a background-checked and uniformed crew identified by license number, and a documented photo record when the job is done - all under the Haven Standard we’ve operated by since 2012. The 365-Day Done Right Promise covers every installation. Text or call; a live person answers 24/7.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Davie since 2012.