Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Impact Garage Doors: The Davie Owner’s Guide
We stock and install Mr-Glass-compatible impact garage doors in Davie, with typical installed prices running $2,800-$5,400 depending on door size, wind-load rating, and whether we’re replacing a full frame or retrofitting an existing opening. Most standard single-car Mr-Glass impact doors are available same-day from our Davie inventory, and we carry the full track, spring, and hardware catalog for the brand’s impact-rated series. Most Davie homeowners discover a problem when the door hangs unevenly in the track, makes a grinding pulse during opening, or shows daylight through a bowed panel after a storm passes.
Which Mr-Glass Models This Applies To
Mr-Glass produces impact-rated garage doors under several series designations, and the part you need depends on which generation you own. The current IM-Impact series uses 2-inch track with reinforced end stiles and a wind-load sticker showing Miami-Dade NOA numbers in the upper right corner of the interior face. Older MRG-series doors from 2015-2019 used 1.875-inch track and a different roller bracket spacing; hardware between the two is not interchangeable without drilling new mount points.
To identify your model, check the aluminum label strip on the door’s left interior side. The IM-Impact label reads “IM-[size]-[wind code]”; MRG labels read “MRG-[size]-[year].” We stock both OEM Mr-Glass hardware kits and verified aftermarket equivalents from Clopay and Amarr that meet the same Florida Building Code TAS 201 impact criteria. For Davie homes in Pine Island Ridge and other areas built before 2005, we often find MRG-series doors with original springs that have exceeded their 15,000-cycle rating; in these cases we recommend the full IM-Impact hardware upgrade rather than patching aging components.
Signs Your Mr-Glass Impact Garage Door Is Failing

- The door drops closed faster than it rises. This indicates a failing torsion spring or an unbalanced drum assembly. Mr-Glass impact doors are heavier than standard non-rated doors, so spring fatigue shows earlier, typically after 12,000-15,000 cycles in Davie’s humidity.
- Grinding or pulsing noise from the track, not the motor. The roller bearings are corroding. Salt air from coastal weather patterns reaches Davie more than inland Broward, and Mr-Glass’s original nylon rollers degrade faster than steel-ball alternatives we now install.
- Daylight visible between the door and frame when closed. The impact-rated panel is bowing or the weatherseal has compressed. On Mr-Glass doors, the bottom astragal seal is a proprietary profile; generic replacements rarely seat correctly.
- The opener strains or reverses unexpectedly. The door’s actual weight has increased due to water intrusion into the impact glass layer, or the spring assist has failed. We see this on west-facing Mr-Glass doors in Davie where afternoon sun degrades the glazing edge seal.
- Visible rust on the bottom fixtures or cable drums. Mr-Glass used zinc-coated hardware through 2020; current production uses stainless. The older hardware lasts roughly 8-10 years in Davie’s climate before pitting begins.
Before
AfterReplacement Cost & What’s Included
| Component / Service | Price Range in Davie |
|---|---|
| Mr-Glass impact door panel (single car, 8×7) | $1,400 - $2,200 |
| Mr-Glass impact door panel (double car, 16×7) | $2,400 - $3,800 |
| Torsion spring replacement (pair, rated for impact door weight) | $280 - $420 |
| Full track, roller, and hardware kit (OEM Mr-Glass) | $340 - $580 |
| Full track, roller, and hardware kit (verified aftermarket) | $220 - $380 |
| Installation labor (standard conditions) | $450 - $720 |
| Full replacement: door, hardware, labor, disposal | $2,800 - $5,400 |
What drives the range: door size, wind-load rating required for your Davie zone, and whether the existing frame is square within 0.25 inch. We measure before ordering; the survey document we leave with you becomes the written quote. No change orders. The 365-Day Done Right Promise covers all Mr-Glass work, and we document the installation with photos you receive by text or email.
DIY or Call Us?

There is one safe check a homeowner can make: pull the emergency release cord and lift the door manually. If it does not stay open at waist height, the spring balance is wrong. Do not attempt to adjust or replace torsion springs yourself. These are wound under extreme torque; improper handling causes serious injury and has killed experienced DIYers. The same applies to cable replacement on an impact-rated door, where the cable tension exceeds that of standard doors due to the panel’s weight.
What we handle: spring winding and anchor bracket alignment, track plumb verification, opener force-limit calibration, and wind-load sticker documentation for your records. We carry Mr-Glass-compatible springs, cables, rollers, and bottom fixtures on every Davie truck. Call (754) 254-8492 to schedule your free estimate.
FAQs
How long do Mr-Glass impact garage doors last in Davie?
In Davie’s subtropical climate, the impact glazing and frame typically last 20-25 years, but the spring hardware needs replacement every 10-12 years and the roller assembly every 7-9 years. Coastal salt exposure accelerates corrosion on non-stainless components. Call (754) 254-8492 for an exact quote on your specific Mr-Glass model.
Can the door be repaired instead of replaced?
Yes, if the impact panel itself is intact and the failure is limited to springs, cables, rollers, or opener hardware. We do not recommend repairing a bowed or delaminated impact panel; the structural integrity is compromised and the door will not pass inspection. Call (754) 254-8492 and we’ll assess whether repair or replacement is the honest call.
How long does a full replacement take?
A standard single-car Mr-Glass impact door replacement takes 4-6 hours including removal, frame prep, and opener recalibration. Double-car doors or jobs requiring full-frame replacement in older Davie homes run 6-8 hours. We arrive with the measured survey already completed and the written scope fixed.
Do you stock Mr-Glass parts on your Davie trucks?
We stock springs, cables, rollers, hinges, and bottom fixtures compatible with both IM-Impact and MRG-series doors. Full door panels are pulled from our Davie warehouse, not the truck, but same-day availability is standard for common sizes. Call (754) 254-8492 to confirm stock for your model.
Sightline Windows & Doors Davie is an independent service provider and is not affiliated with Mr-Glass. We also stock parts for PGT, CGI, and CWS impact garage door systems.
Measure it right the first time. Everything else follows from that.
Written by Sonia Raman, Owner, Sightline Windows & Doors Davie at Sightline Windows & Doors Davie, serving Davie and nearby areas.










Before
After
Before
After
Before
After