Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Window Installation: The Davie Owner’s Guide
Mr-Glass window installation in Davie typically runs $340-$780 per opening depending on frame type and whether the job is a retrofit or full-frame replacement, and we stock Mr-Glass-compatible hardware and components on every truck. Most Davie homeowners call us after noticing their windows no longer seal properly against afternoon thunderstorms or finding moisture between the glass layers after a humid summer. The failure usually starts with the glazing bead, the balance system, or the weatherstripping, each of which degrades faster in South Florida’s salt-air and UV exposure than the manufacturer specs suggest.
Which Mr-Glass Models This Applies To
Mr-Glass produces several series common in Davie homes built between 2015 and 2022: the MG-2000 single-hung vinyl line, the MG-Impact aluminum impact-rated series, and the MG-Premium hybrid frame system. The MG-2000 uses a constant-force coil balance with a 5/8-inch sash track width, while the MG-Impact and MG-Premium lines run a block-and-tackle balance in a 3/4-inch track. The part you need depends on which balance type is stamped on the metal channel visible when you tilt the sash inward.
To identify your model, check the etched logo in the glass corner and the AAMA certification sticker on the frame header. The sticker lists the series code and the original performance grade. For balances, we match by stamped pound rating, not by window dimensions alone; a 28-by-52-inch MG-2000 in Davie often carries a 7-pound balance, but we’ve measured identical rough openings that needed a 9-pound unit due to laminated glass weight. We carry both OEM Mr-Glass balances and quality equivalents from AmesburyTruth that meet the same cycle-life spec. Sightline Windows & Doors Davie is an independent service provider, not affiliated with Mr-Glass.
Signs Your Mr-Glass Window Installation Is Failing

- The sash drops or won’t stay open. This points to a failed balance spring. In Davie’s coastal environment, we’ve found Mr-Glass coil balances lose tension 20-30 percent faster than inland ratings predict due to salt-air corrosion of the spring housing.
- Visible moisture or fog between glass panes. The insulated glass unit (IGU) seal has failed. South Florida’s thermal cycling, especially in unshaded west-facing openings, accelerates seal degradation beyond the 10-year baseline.
- Air infiltration at the sash meeting rail. The weatherstripping has compressed or the interlock has warped. We see this most in Davie’s Pine Island Ridge homes where afternoon sun hits dark frame colors and causes PVC expansion cycling.
- Cracked or missing glazing beads. These vinyl or rubber strips hold the glass in the frame. UV exposure brittles them in 6-8 years here, versus the 12-year rating based on Arizona test data.
- Frame corrosion at the sill or jamb. On MG-Impact aluminum frames, weep-hole blockage traps condensation. We’ve cleared weep systems packed with sand from Davie’s occasional Saharan dust events.
Before
AfterReplacement Cost & What’s Included
| Service | Price Range in Davie |
|---|---|
| Balance replacement (per sash) | $180-$290 |
| IGU replacement (per lite) | $340-$520 |
| Weatherstripping replacement (full window) | $140-$220 |
| Glazing bead replacement (per opening) | $120-$190 |
| Full-frame Mr-Glass replacement | $680-$1,240 |
These ranges include parts, labor, and disposal. What moves a job toward the higher end: impact-rated glass, second-story access requiring scaffolding, or frame damage requiring structural remediation. We don’t quote by phone for full-frame work; Haven Clause 1 requires a measured survey we leave with you, and the written price on that document matches the final invoice. Every Mr-Glass part installation carries our 365-Day Done Right Promise under the Haven Standard.
DIY or Call Us?

There’s a safe middle ground. A homeowner can check the AAMA sticker location, photograph the balance stamp, and confirm weep-hole clearance with a pipe cleaner. What we don’t recommend: removing a sash with a failed balance unassisted, cutting out a failed IGU, or attempting to re-glaze an impact-rated lite. The MG-Impact series uses tempered and laminated combinations that require specific setting blocks and edge clearance; improper handling creates a safety hazard and voids the original performance certification.
We carry Mr-Glass-compatible balances, glazing beads, and weatherstripping profiles on every Sightline truck in Davie. If you photograph your sticker and balance stamp, we can confirm compatibility before dispatch. Call (754) 254-8492 to schedule your free estimate.
FAQs
In South Florida’s salt-air and UV environment, we’ve found Mr-Glass coil and block-and-tackle balances typically function 6-10 years, below the 15-year cycle-life rating based on inland testing. West-facing windows with dark frame colors experience the shortest lifespan due to thermal expansion stress. Call (754) 254-8492 for an exact quote on replacement; estimates are free.
No. Once the desiccant inside the spacer bar saturates and moisture enters the air space, the insulated glass unit must be replaced. Defogging services drill holes and apply surface coatings, which voids the original thermal performance rating and does not restore the structural integrity of the seal. Call (754) 254-8492 for an exact quote; estimates are free.
Balance or weatherstripping replacement on a ground-floor single-hung takes 45-90 minutes per opening. IGU replacement requires 24-48 hours for the glazing tape to set before the sash can be operated, though the installation itself is same-day. Full-frame replacement runs 4-6 hours per opening depending on exterior finish repair scope. Call (754) 254-8492 to schedule your free estimate.
Yes. We carry MG-2000 and MG-Impact balance assemblies in common pound ratings, glazing bead profiles for both vinyl and aluminum series, and compression weatherstripping that matches Mr-Glass original specs. For IGUs and custom geometric shapes, we measure on-site and order from our verified supplier with a 7-10 day turnaround. Call (754) 254-8492 to confirm your specific part; estimates are free.
Measure it right the first time. Everything else follows from that. Sonia Raman still applies that rule she learned at Los Angeles Trade-Technical College to every measured survey her crew runs in Davie, including the full-frame replacements we’ve done in Pine Island Ridge where older construction demands extra frame depth verification.
Written by Sonia Raman, Owner, Sightline Windows & Doors Davie at Sightline Windows & Doors Davie, serving Davie and nearby areas.










Before
After
Before
After
Before
After