CGI Windows & Doors in Plantation, FL

CGI Windows & Doors in Plantation, FL | Sightline Windows & Doors Davie

Our Impact Windows & Doors in Plantation typically runs $280-$620 per opening for repair work and $1,400-$3,200 per opening for full-frame impact replacement, with most repair calls completed in a single visit. What makes our CGI work here different is simple: Plantation’s housing stock was built out between the late 1950s and mid-1980s, so nearly every job involves modifying non-standard jalousie or single-pane aluminum rough openings in CBS construction - not swapping like-for-like. We measure those openings ourselves, document the readings, and hand you the written price before any work starts. Call (754) 254-8492 to schedule your free measured survey.

Call (754) 254-8492

Why Plantation Residents Choose Us for CGI Service

We’ve installed and serviced CGI products across Plantation’s pre-Andrew neighborhoods - from the 1960s ranches near Plantation Acres to the CBS homes off Broward Boulevard - and the pattern repeats: original openings that don’t match modern frame dimensions, stucco-to-frame joints that have leaked for decades, and homeowners who’ve already had one contractor walk away after discovering the rough opening problem on installation day.

Sonia Raman, who leads our crew, started in glazing at Los Angeles Trade-Technical College and spent twenty years working through every phase of window and door installation before bringing that field experience to Broward County. She measures twice before ordering anything. On a 1968 CBS ranch off NW 70th Avenue in Plantation, we pulled original louvered jalousie units that had zero impact rating and found rough openings roughly an inch off CGI’s standard frame dimensions. We furred and re-flashed the CBS openings, then set CGI Sentinel single hung impact units with low-E glass - the homeowner got a sealed, code-compliant envelope and the leaking stucco-to-frame joint disappeared with it.

We’re an independent installer - not authorized or sponsored by CGI - which means we can tell you straight when a CGI unit fits your opening and when a different manufacturer line makes more sense. Our CGI sales & service draws from eight verified manufacturer lines, specified by what the opening requires, not by what is in stock. Every job carries the 365-Day Done Right Promise under the Haven Standard, with a documented photo record and the written price you received at survey.

Common CGI Windows & Doors Problems We Solve in Plantation

• Perimeter air and water leaks from mis-sized retrofits. Original jalousie and single-pane aluminum openings in 1960s-70s Plantation subdivisions are non-standard, so CGI impact units often won’t seat without modifying the CBS rough opening. Contractors who shim-pack or foam-fill rather than fur and re-flash create leaks that show up six months later. We see this most in the older sections of Plantation Acres and the neighborhoods west of University Drive.
• Stiff or dragging sashes on horizontal rollers and sliders. Plantation’s year-round humidity and grit blowing off the mature, built-out 1960s-80s landscaping accelerates roller and track wear on CGI horizontal rollers and sliders. The glass is fine; the hardware is not. We stock genuine CGI replacement rollers and sash locks where available, and match to heavy-duty aftermarket when the profile has been discontinued.
• Edge delamination and seal creep on impact glass laminates. Miami-Dade/FBC impact glass laminates on CGI units can develop edge delamination under Plantation’s intense UV load, especially on west- and south-facing elevations with no mature tree canopy. The glass looks intact until the interlayer starts to fog at the perimeter. We document this with frame photos and specify low-E, high-performance laminates on replacement units.
• Stucco-to-frame water intrusion misread as window failure. On original CBS homes throughout Plantation, the stucco-to-frame transition cracks and lets water wick behind CGI frames. Homeowners call us for a “window leak” when the real failure is the flashing and perimeter seal. Our survey includes a moisture-path inspection; we fix the actual problem, not the symptom.
• Jalousie frame rot and custom-order lead times. Jalousie windows - still common in Plantation’s 1960s-70s subdivisions - have non-standard frames that cannot accept impact-rated glazing. Removal requires modifying the CBS rough opening and custom-ordering CGI impact units, a surprise cost and lead-time issue that catches contractors off guard until they’re already on-site. We flag this at survey, not at installation.

Before

After

CGI Service in Plantation: What Local Conditions Mean for Your Equipment

Plantation was built out almost entirely between the late 1950s and mid-1980s as a planned community, so its neighborhoods are saturated with original jalousie and single-pane aluminum units whose rough openings are non-standard - meaning a CGI impact install here is almost always a rough-opening modification, not a swap-in. This is not equally true in neighboring cities. Weston, incorporated in 1996, was developed post-Andrew with standardized openings and hurricane code already in effect; a CGI install there is typically a retrofit into a prepared frame. In Plantation, the same CGI Sentinel single hung that drops into a Weston opening may require furring, re-flashing, and stucco repair on a 1972 CBS home near Plantation Heritage Park. The inland location - roughly 10-12 miles from the Atlantic - also matters: less salt-air corrosion than Dania Beach or Hallandale Beach, but the same UV load and hurricane-track exposure that make impact-rated, low-E glass a functional necessity, not a luxury upgrade. We’ve learned to carry wider jamb extensions and custom sill adapters on our Plantation service area trucks because the opening variability is that consistent.

CGI Models & Products We Service in Plantation

Our crew works with the full CGI residential and light-commercial line, matched to Plantation’s retrofit reality:

• CGI Sentinel Impact Series - single hung and horizontal roller units, the workhorse for Plantation’s standard-size residential openings; we stock common sash locks, rollers, and screen frames for same-visit repair.
• CGI Estate Series - impact windows and sliding glass doors for larger openings and upgraded aesthetics; often specified in Plantation’s partial renovations where the homeowner is keeping the original CBS structure but modernizing the envelope.
• CGI Sentinels impact entry doors and French door systems - including multi-point hardware and threshold adjustments for settled 1960s-80s slab foundations.
• CGI aluminum impact wall systems - fixed and picture units for larger openings, including geometric and custom configurations where the original jalousie bank is being replaced with a single impact-rated field.

We source genuine CGI replacement hardware - rollers, sash locks, weatherstrip, and screens - where it’s still available for the unit’s generation, and match to heavy-duty aftermarket when CGI has discontinued the profile. On pre-1980 Plantation openings, honest repair of a CGI sash is usually worth it, but once a jalousie or single-pane frame has to be modified anyway, our Window Replacement in Plantation is the better long-term spend.

CGI Service Pricing in Plantation

FAQs - CGI Windows & Doors in Plantation

Service Areas Near Plantation

We serve Plantation and the surrounding Broward communities from our Davie base. Our crew regularly works in CGI service in Davie, including the Pine Island Ridge neighborhood where older homes often need full-frame replacements rather than retrofits. We also cover CGI service in Cooper City, plus Pembroke Pines, Sunrise, and Lauderhill. The same measured survey, written price, and documented photo record applies in every service area.

Book Your CGI Service in Plantation Today

Call (754) 254-8492 to schedule your free measured survey. We’ll document your openings, identify any rough-opening modifications needed, and hand you a written price before any work starts. That’s Haven Clause 1, and it’s been the rule on every one of our 18,000+ installations since 2012. Measure it right the first time. Everything else follows from that.

Written by Sonia Raman, Owner at Sightline Windows & Doors Davie, serving Plantation and Broward County since 2012.