Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Davie
Impact window and door replacement in Davie must carry a Miami-Dade Notice of Acceptance to pass Broward County permitting, and most homes here still run original aluminum units that predate that requirement. We’re the Impact Windows & Doors team at Sightline Windows & Doors Davie, and we coordinate dispatch and scheduling from our South Florida office so crews reach Davie properties on schedule, measured survey in hand. Call (754) 254-8492 to schedule your free estimate. Every quote we write in Davie is the same document the crew uses for installation. No change orders, no verbal revisions.
Why Sightline Windows & Doors Davie Is Davie’s Preferred Impact Windows & Doors Company
We’ve completed thousands of installations across Broward County since 2012, and Davie’s equestrian-lot ranch homes represent one of the most technically demanding segments of that work. The town’s 1970s-1990s CBS housing stock, oversized sliding glass doors opening to paddocks, and strict HVHZ compliance requirements mean a generic installer often misses permit details that delay projects by weeks. Our Davie customers leave three-star and four-star reviews citing specifically that we handled the Broward County permit submittal, the Miami-Dade NOA verification, and the final inspection without passing paperwork back to them. Live phone coverage is available 24/7, not a callback window. Every technician is background-checked, uniformed, and identified by license number before arrival. That’s Haven Clause 3, Verified Crews, and it applies to every Davie property we enter.
Our Impact Windows & Doors Services in Davie

Impact-Resistant Windows
Every impact-resistant window we specify for Davie carries a current Florida Product Approval or Miami-Dade NOA, without exception. Broward County’s HVHZ status means products that pass in Palm Beach County often fail here. We measure the exact design pressure rating each opening requires, document it on the survey you keep, and match that spec to our PGT, CGI, or CWS lines. For the ranch homes off Griffin Road and Stirling Road, this frequently means replacing original jalousie or single-pane aluminum casements with large-missile-rated impact units that meet the strictest wind-load jurisdiction in the country.

Hurricane Impact Windows
Hurricane impact windows in Davie aren’t a product category, they’re a code mandate. Florida Statute 627.0629 ties wind mitigation insurance credits to documented installation of HVHZ-compliant products, and Davie’s inland position 10-12 miles from the Atlantic doesn’t relax that standard. Salt-air intrusion still reaches these properties, accelerating frame oxidation and glazing seal failure on non-impact aluminum units. We specify hurricane impact windows from PGT WinGuard and ES Windows lines with documented NOA numbers, pull the Broward County permit, and pass inspection. The homeowner receives the compliance documentation needed for their insurance filing.

Single Hung Impact Windows
Single hung impact windows remain the most common replacement spec for Davie’s original ranch-home bedrooms and street-facing elevations. The fixed upper sash and operable lower sash match the sightline of the aluminum units being removed, preserving the home’s exterior character while meeting HVHZ large-missile and cyclic pressure requirements. We stock single hung configurations from PGT and ViewLux in standard sizes, with custom sizing available for the non-standard rough openings common in 1970s CBS construction. Lead times vary by manufacturer; we name the exact week before you sign.

Double Hung Impact Windows
Double hung impact windows suit Davie homeowners who want operable upper and lower sashes for cleaning access or ventilation control. Both sashes tilt inward on our specified PGT and Therma-Tru lines, and both carry the same Miami-Dade NOA as our fixed units. The dual operable sashes add hardware complexity, so we document the exact U-factor and SHGC ratings on your written quote. In Davie’s climate, where cooling loads run high eight months of the year, that glazing spec matters for both code compliance and utility cost.

Horizontal Roller & Sliding Impact Windows
Horizontal roller windows fit the wide, low-profile openings common in Davie’s ranch-home additions and Florida rooms. The sash glides on a track rather than lifting, which suits homeowners who’ve struggled with sticky aluminum units. Every horizontal roller we specify for Davie carries the same HVHZ rating as our fixed products; the roller hardware itself is tested to the same cyclic pressure standard. We measure the exact rough opening, account for the structural reinforcement the HVHZ rating requires, and document it on the survey.

Wind Mitigation & HVHZ Code Compliance
This is where Davie work separates from standard window replacement. Every product must hold a valid Miami-Dade NOA or Florida Product Approval before Broward County will issue a permit. Our measured survey identifies the exact design pressure rating each opening requires, we verify the manufacturer’s NOA matches that rating, and we submit both documents with the permit application. After installation, we pass the county inspection and deliver the compliance documentation. That paperwork is what your insurance underwriter needs to apply wind mitigation credits under Florida Statute 627.0629. A quote that omits permit handling, NOA verification, or inspection scheduling isn’t cheaper; it’s incomplete.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Davie
We specify from eight manufacturer lines, chosen by what the opening requires, not by what sits in a warehouse. For Davie’s HVHZ environment, we most often draw from PGT WinGuard for impact-rated vinyl and aluminum systems, Therma-Tru for entry door systems with documented NOA compliance, and ViewLux for custom geometric and oversized configurations. Mr-Glass lines cover specific large-missile applications where standard product ranges fall short. We don’t stock every size; we stock the relationships that let us confirm lead times and NOA status before you receive a written price. That matters in Davie, where an 8-foot sliding glass door to a paddock often requires custom engineering most manufacturers don’t keep on the shelf.
Common Impact Windows & Doors Problems We See in Davie Homes

- Original jalousie and single-pane aluminum casements fail every current HVHZ standard. These units carry no impact rating, no design pressure documentation, and no path to permit approval. We replace them with Miami-Dade NOA-rated impact casements or single hung units, documented for your insurance filing.
- Oversized sliding glass doors on equestrian lots require custom HVHZ-rated impact sliders. The 8-foot-plus openings to rear paddocks off Stirling Road and Griffin Road need reinforced jambs, upgraded hardware, and large-missile-rated glazing that standard product lines don’t include. Ordering a standard slider leads to fitment failure and non-compliance.
- Salt-air and UV degradation destroys non-impact aluminum frames within years, not decades. Davie’s inland position doesn’t eliminate coastal corrosion; we see oxidation and glazing seal failure on 10-year-old non-impact units that void wind mitigation eligibility and leak during seasonal storms.
- Permit rejections from incomplete NOA documentation. Broward County inspectors verify the exact NOA number on the installed product against the permit submittal. A quote that doesn’t name the specific approval document, or that substitutes a similar product mid-job, gets red-tagged. We specify, order, and install the exact NOA-listed unit named on your written quote.
Pricing for Impact Windows & Doors in Davie, FL
Impact window and door pricing in Davie runs higher than in non-HVHZ counties because the products, permits, and inspections cost more. Here’s what we see in this market:
| Service | Typical Range in Davie |
|---|---|
| Single hung impact window (standard size) | $650 - $1,100 per opening |
| Double hung impact window (standard size) | $780 - $1,350 per opening |
| Horizontal roller impact window | $720 - $1,250 per opening |
| Standard impact sliding glass door (6 ft) | $2,400 - $3,800 |
| Custom HVHZ impact slider (8 ft+ for equestrian lots) | $4,200 - $6,500+ |
| Full-home replacement (12-18 openings, typical Davie ranch) | $14,000 - $28,000 |
| Wind mitigation documentation package | Included on every job |
What moves price within these ranges: the exact NOA-rated product specified, custom sizing for non-standard rough openings, the condition of existing frames and sill plates, and whether the home requires HVHZ structural reinforcement beyond standard installation. We don’t estimate over the phone. We measure every opening, note the structural conditions, specify the exact product by manufacturer and NOA number, and write the price on the survey you keep. That document becomes the scope of work. Call (754) 254-8492 to schedule your free measured survey.
We Also Serve Cities Near Davie

Our crews work across Broward County from the same South Florida dispatch office. We regularly complete Impact Windows & Doors in Davie and neighboring Cooper City, Plantation, Pembroke Pines, and Sunrise. The same Haven Standard, the same written-price-first process, and the same documented photo record apply to every property.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Davie

They must carry a valid Miami-Dade Notice of Acceptance or Florida Product Approval with a design pressure rating matching the specific opening’s HVHZ requirement. Broward County enforces the strictest wind-load standard in the US, alongside Miami-Dade. Every product we specify for Davie is verified against the current NOA database before the permit application is filed. Call (754) 254-8492 for an exact quote on your specific openings - estimates are free.
No. Standard impact sliders are engineered for 6-foot rough openings. An 8-foot or wider door to a rear paddock requires a custom HVHZ-rated impact slider with reinforced jambs, upgraded hardware, and a large-missile rating that most manufacturers don’t stock. We specify these from PGT or custom-engineered ViewLux lines, confirm the NOA covers the exact width, and document the lead time on your written quote. Call (754) 254-8492 to schedule a measured survey of your opening.
It can reduce your windstorm premium under Florida Statute 627.0629, but only with documentation. The underwriter needs proof of Miami-Dade NOA-rated products, permit completion, and passed inspection. We deliver all three in a compliance package after every job. On a 1970s CBS ranch off Stirling Road, our crew replaced original non-impact aluminum sliders and jalousie windows with PGT WinGuard impact-rated glazing units carrying a Miami-Dade NOA; the 8-foot opening required a custom HVHZ-rated slider with reinforced jambs and a large-missile rating. We handled the Broward County permit, the HVHZ product approval submittal, and the final inspection. The homeowner later used our compliance documentation to secure a wind mitigation credit under Florida Statute 627.0629. Call (754) 254-8492 to discuss how this applies to your policy.
Yes, measurably. Davie’s cooling season runs eight months, and Low-E coatings with appropriate SHGC ratings reduce solar heat gain through glazed openings. We specify the exact U-factor and SHGC on your written quote, matched to your home’s orientation and shading. The savings vary by home, but the specification is documented, not assumed. Call (754) 254-8492 for a free estimate with glazing options named in dollars.
A compliant quote names the exact manufacturer, product line, and Miami-Dade NOA number for every opening; includes Broward County permit fees and submittal; schedules the inspection; and delivers a compliance documentation package for your insurance filing. A cheap quote often omits one or more of these, leaving the homeowner to discover the gap at permit rejection or insurance denial. At Sightline, the measured survey you keep and the written quote are the same document. Call (754) 254-8492 to compare your current estimate against our line-item scope.
Ready to replace your windows or doors? Call (754) 254-8492 to schedule your free measured survey. We’ll arrive on schedule, document every opening, and write the exact price before any work starts. That’s Haven Clause 1. It’s been our process since 2012.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Davie under the Haven Standard since 2012.










Before
After
Before
After
Before
After